[tedd]

Re: bosch wfl20666b wont start

thanks beever,the lady rang me this morning and said the machine worked ok over the weekend will wait to see what happens tedd

[tedd]

Re: hotpoint wf240

thanks penguin tedd.

[tedd]

Re: whirpool awm5125

hi,thanks for replies,i changed brushes and away it went many thanks tedd

[tedd]

Re: creda tcs3 tumble dryer

thanks for reply found i didnt have to take drum out like on older models

[tedd]

Re: Zanussi Tumble Drier TC7102W

i had this problem with a creda condenser dryer.there was a small hole in the water container which slowly leaked out and seemed to evaporate.the dryer wored perfectly but no water in container.you could check on the floor of dryer after use,regards tedd.

[tedd]

Re: zanussi fault codes

thanks for your help,went to it today and found filter blocked.

[tedd]

Re: zanussi fault codes

hi i already checked that page but the numbers do not correspond

[tedd]

Re: whirlpool and indesit

thanks for the advice the impellor had come off the shaft regards tedd

[tedd]

Re: bendix tm310 condenser dryer

hi jim,it doen`t have a start relay behind thh button like the creda,but 2 wires going to the timer.the numers on machine are type 542232,prod no 916092602/01,and no44900245 many thanks tedd

[tedd]

Re: whirlpool and indesit

thanks for the reply.there doesn’t seem to be a blockage,so are the lift pumps repairable or replaceable and are they easy to do.this is the first time i have come accross this machine,thanks tedd

[tedd]

Re: whirlpool commercial top loader

hi received part now how to fit .any suggestions so i can save time as i have not done one of these before

[Author]

Posts