tedd

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 26 total)
1 2
  • Author
    Posts
  • December 30, 2011 at 5:50 pm in reply to: bosch wte84107 gb cond dryer #366291
    tedd
    Participant

    Re: bosch wte84107 gb cond dryer

    thanks martin i will have a look

    December 5, 2011 at 8:32 am in reply to: bosch waa24171gb #364769
    tedd
    Participant

    Re: bosch waa24171gb

    thanks for all your replies,i will look into these many thanks tedd

    September 13, 2011 at 6:51 pm in reply to: zanussi zwf 1650w #358483
    tedd
    Participant

    Re: zanussi zwf 1650w

    thanks gandh1 for your help
    regards tedd

    August 15, 2011 at 7:35 am in reply to: zanussi zwf 12070 #357200
    tedd
    Participant

    Re: zanussi zwf 12070

    thanks dave for the prompt reply
    regards
    tedd

    March 31, 2011 at 7:25 pm in reply to: indesit wixl 143 #348272
    tedd
    Participant

    Re: indesit wixl 143

    hi thanks for the reply but the motor and the brushes are fine.i can hear the board at the bottom left clicking in and out i will try emw in the morn,regards tedd

    February 22, 2011 at 6:23 pm in reply to: indesit widl126 #345344
    tedd
    Participant

    Re: indesit widl126

    thanks for the replies,i fitted the correct part no,and cheked for blockages,so i the board must have gone.what seemed to be nice simple jobs didnt turn out that way regards tedd

    February 22, 2011 at 6:16 pm in reply to: hotpoint ctd40 #345340
    tedd
    Participant

    Re: hotpoint ctd40

    hi,thanks for the replies,the white spot was o/c and they come in a kit part nocoo116598 or 1703200 is this right one regards tedd

    December 8, 2010 at 8:44 pm in reply to: whirpool awz8557 t/dryer #338065
    tedd
    Participant

    Re: whirpool awz8557 t/dryer

    thanks martin job done regards tedd

    August 9, 2010 at 4:56 pm in reply to: whirlpool k20 icemaker agb 022 #327096
    tedd
    Participant

    Re: whirlpool k20 icemaker agb 022

    hi,thanks for the replies i will order one and try it regards tedd

    May 17, 2010 at 7:56 am in reply to: hotpoint wd640 door seal #320357
    tedd
    Participant

    Re: hotpoint wd640 door seal

    thanks iadom

    January 31, 2010 at 9:11 pm in reply to: hoover hdc 6 dryer #310598
    tedd
    Participant

    Re: hoover hdc 6 dryer

    thanks for that advice penguin regards tedd

    September 23, 2009 at 7:45 am in reply to: hotpoint wf321 wont start #297713
    tedd
    Participant

    Re: hotpoint wf321 wont start

    thanks for the replies i will check the carbons,didnt think that they could cause such a fault regards tedd

    June 17, 2009 at 1:06 pm in reply to: zanussi fle1216w w/m #289368
    tedd
    Participant

    Re: zanussi fle1216w w/m

    hi martin,it filled and emptied ok while i was there but the problem seems intermittent.the only clue i have is the lights staying on and the start flashing

    March 18, 2009 at 7:54 pm in reply to: hotpoint wf560 #280705
    tedd
    Participant

    Re: hotpoint wf560

    thanks for the prompt replies,so just to be sure it will be ok to rotate 180 so the connections fit regards tedd

    March 1, 2009 at 9:50 pm in reply to: hotpoint wd420 #278847
    tedd
    Participant

    Re: hotpoint wd420

    thanks for the advice.

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 26 total)
1 2