[TELL]

Re: Need a bit help with this one, Belling/stoves oven

done that don,
have there site on favorites.
still not coming up with part No. for the glass.
have tried there site, prior to asking you gents on UK whitegoods.
the model no’s are different, ie.
050564173/174/175/176
TELL..
or am i doing it wrong.

[TELL]

Re: whirlpool AWO 3761/5 door lock problems?

thanks gents, found the prob, PCB up the spout, looks like the heater relay circuit blown.
but problem re occurred through half way on wash.
its a one to note, light on for door locked, shuts down, and door not locking, but if you put a new lock on it works, but not through a full prog, its blows lock circuits.
thanks for the feed back.
TELL..

[TELL]

Re: Cannot find correct part no for a CDA Oven

Spot on John, got what i needed’
Thanks
TELL..

[TELL]

Re: Which timer for this appliance

thanks gents’
TELL..

[TELL]

Re: All the best to start with for 2011. Nardi Clock/Timer?

Thanks Andy, will go with that.
TELL…

[TELL]

Re: Whirlpool American Dryer

i had parts from connect, masterparts, and qualtex.
these have supplied me in the past.
hope this helps.
TELL…

[TELL]

Re: Schott Ceran HC60

Contact
SCHOTT UK Ltd

Sales Office
Drummond Road
Astonfields Industrial Estate
ST16 3EL Stafford
United Kingdom
+44 (0)1785 223166
+44 (0)1785 223522
will this help??.
TELL..

[TELL]

Re: IDL40UK d/washer, soap/rinse aid disp keeps chattering o

Rick T
base is bone dry, unplugged connector on dispenser, to stop solonoid banging on/off. and all functions ok, fills, washes, drains, and not a leak.
TELL..

[TELL]

Re: WHP (Dutch machine) DVGWM657E 857061212903 motor earthin

Mike,
Funnily you should say that, i just done carbons on a Beko washer to day, pulled motor block off, then looked for the earth, none on, are we getting to old, and set in our ways, for what we should be looking for.
TELL..
p.s this was hung on a plastic drum.

[TELL]

Re: AEG 60870 PNC 911 232 542 04

there was a problem on the hose at the front of the sump to the pressure switch/air chamber sagging, therefore holding water in it, and keeps the pressure switch in a full position, make sure the hose is clear of gunge, and it is straight, or slightly tappering back to drain any residue back to the sump, it gave that fault code. a tie tag is normally used in keeping the hose from sagging.
another possible cause.
TELL..
p.s you can check this from the front bottom panel.

[TELL]

Re: indesit IDL40UK

Not thinking chaps late finish last night and rushing to go out.
I think this should have been put onto trade tech stuff.
will transfer onto that,Opps.
TELL..

[TELL]

Re: set of control knobs needed Tecnik TKC1495S range cooker

thanks for that andy.
TELL..

[TELL]

Re: diplomat dbl oven, control knob required.

done, and ordered.
thanks,
TELL..

[TELL]

Re: diplomat dbl oven, control knob required.

thanks
will give you a ring. there is no model No: on the cooker, but customer has still got the instruction/installation book statlng the various models it covers.ie, ADP4851/62/83/04 and finally/90. the only model listing coming up on a search is the ADP4851.
TELL..

[TELL]

Re: Hopefully a quick one for somebody, tecnik grill element

thanks andy,
TELL..

[Author]

Posts