TELL

Forum Replies Created

Viewing 15 posts - 76 through 90 (of 462 total)
  • Author
    Posts
  • in reply to: ancient moffat gas d oven 3005 #357272
    TELL
    Participant

    Re: ancient moffat gas d oven 3005

    it was a common latch assy we carried on our van stocks, in the old thorn emi days which owned, tricity, moffat, and i’m sure it was the same latch, if that is the part you are looking for.
    TELL..

    in reply to: Tricity Princess lid spring hinge #357004
    TELL
    Participant

    Re: Tricity Princess lid spring hinge

    572584666000 on connect as (Special. Compression spring 1528A cooker (5031681146041)
    5721234961007 on connect as (Hinge (L/h) Bracket 1528A ckr (5031681731391)
    dont know if this will help. no pictures, and not in stock.
    but have you tried this link, http://shop.zanussi.co.uk
    TELL..

    in reply to: ancient moffat gas d oven 3005 #357270
    TELL
    Participant

    Re: ancient moffat gas d oven 3005

    is this the type you are looking for, its on the connect site as Code: ELE2344
    been along time since ive worked on this model.
    TELL..

    in reply to: wirlpool american style top loader washer #355267
    TELL
    Participant

    Re: wirlpool american style top loader washer

    Hi Dave,
    will have to check the fuses i’m putting in to see if it’s fast blow, or timed. the fuse i’ve benn putting in are a glass covered one, but they are blown and leaving they wire. not vapourised.
    TELL..

    in reply to: Hoover TV630-001 no power to the elements #353580
    TELL
    Participant

    Re: Hoover TV630-001 no power to the elements

    hi,timdowning
    mine must be the earlir one, has a single stat on top,but if its an internal one shot cut out, how is it that when i’ve disconnected the 3 wires to the element, red,yellow, and white, that i’m getting a reading through both elements. the stat on the top has 240v, and is still in circuit.
    TELL

    TELL
    Participant

    Re: beko DRCS68w Condenser Drier only 1/2 element heating.

    Got that info through on my email Seamey,
    thanks for your help, I dont feel like an idiot now, espiecialy when you have the info required.
    TELL..

    in reply to: beko DRCS68w Condenser Drier only 1/2 element heating. #352099
    TELL
    Participant

    Re: beko DRCS68w Condenser Drier only 1/2 element heating.

    PS. whats procedure for service mode,
    TELL..

    in reply to: beko DRCS68w Condenser Drier only 1/2 element heating. #352098
    TELL
    Participant

    Re: beko DRCS68w Condenser Drier only 1/2 element heating.

    thanks for that info, will give another go.
    TELL..

    in reply to: beko DRCS68w Condenser Drier only 1/2 element heating. #352096
    TELL
    Participant

    Re: beko DRCS68w Condenser Drier only 1/2 element heating.

    checked that jazz, i have contiuity through the stat, and i think that one in the top at front is for the sensor, on autodry?.
    TELL..

    in reply to: Stoves Range cooker 200564131 sn11100828 #351006
    TELL
    Participant

    Re: Stoves Range cooker 200564131 sn11100828

    top comes off,
    TELL.

    in reply to: Stoves Range cooker 200564131 sn11100828 #351004
    TELL
    Participant

    Re: Stoves Range cooker 200564131 sn11100828

    No My Friend,
    There is no esay fix for this, you have to get the conversion kit, as the thermostat is obselete. and the instructions do come with it to convert, the only thing is if its the main oven, or 2nd oven fault. You can convert the one you need and can keep the other half for a later date, or you could be lucky, and use the other half on another appliance, to gain little bit extra, on the delivery charge of the kit, but do hold onto it, it will be used.
    TELL..

    in reply to: HEC 1050 washer F/code 7 motor out of cicuit/overheat #351032
    TELL
    Participant

    Re: HEC 1050 washer F/code 7 motor out of cicuit/overheat

    Thanks for the info bazza.
    TELL..

    in reply to: HEC 1050 washer F/code 7 motor out of cicuit/overheat #351030
    TELL
    Participant

    Re: HEC 1050 washer F/code 7 motor out of cicuit/overheat

    so who does the parts for this m/c, has anybody got a part no. and price for this motor, could do with information for wednesday gents,
    much appreicated.
    TELL..

    TELL
    Participant

    Re: W/pool dishwasher ADG7560/1 fills, then drains, then sto

    Found the fault. It was the module. Thanks. Tell..

    TELL
    Participant

    Re: W/pool dishwasher ADG7560/1 fills, then drains, then sto

    does not come up with a fault,ie flashes 7 times. it bleeps twice then drains.
    TELL..

Viewing 15 posts - 76 through 90 (of 462 total)