Forum Replies Created
-
Posts
-
electrofix wrote: there are various reasons why it floods the base. normally a hole in a hose or the door rubber. does it dribble down the front of the machine from the door or soap draw? it can end up underneath by going through the kick strip
Dave
The error code has cleared , do you think once the rest of the water is drained out, the error code might come back? It only comes one when it wobbles, one on the legs must have unscrewed after moving it
tubafan wrote:The item in the photo is a tick removal tool for pets. I have a less bent version exactly like it.
Doh! I have got a dog but I don’t remember buying that.
electrofix wrote: there are various reasons why it floods the base. normally a hole in a hose or the door rubber. does it dribble down the front of the machine from the door or soap draw? it can end up underneath by going through the kick strip
Dave
I left a mixer tap running slightly over my worktop , and had a minor flood, I think water would have got under the machine that way.
matrixresonator wrote:When you moved it some water will have run out resetting the float switch. If there’s a fault it will continue leaking and activate the float again.
Ok thank you I’ll keep an eye.
Ah ok thanks, i never thought to check the font etc thanks all.
now I’ve eliminated tnis, can anyone tell me, my washer produced an error cod 138, I have got it working again by levelling it with a wedge but it for seem to be leaking a little from the base, I assume this is the drip tray overflowing error? Do. Need to call tne Miele engineer. I’ve cancelled tne £279 visit but I think I’ll need to book tne £150 visit? Is tnis sound right or is there anything else I can do to put it rightIt’s a flat, wedge shape piece of white plastic about 2.5 inches long which has a metal loop on the end that looks a bit like you get on a fuse
