Forum Replies Created
-
Posts
-
Re: ISE AW23 Woes…..
Okay, I’ve removed the pump access plug, I can see the impeller and there’s nothing in there but water.
I’m now running a maintenance wash (95º cotton program) and the water is not heating up, why am I not seeing an error code on the display?
Looks like it’s engineer call out time……………again 😡
Re: ISE AW23 Woes…..
Carrying on in the same vein, the machine is now well over two hours into a simple 30/40 mix program 😡
It’s sitting at one minute left on the display and will happily stay on that cycle all night unless I switch it off.
Surely to grief there’s something amiss?
Re: ISE AW23 Woes…..
So, if the water isn’t heating up – would this prolong the length of the wash cycle?
Re: ISE AW23 Help needed please!
Thanks guys, the wife’s going to have to learn to adapt to the machine – not the other way around 🙂
Re: Zanussi ZWF1430W No wash action
Many thanks for the advice odom, the machine is five years old and well used and we need a replacement pretty quickly so….I’ve ordered an AW23 today for delivery and installation on Monday.
I hope that this meets with your approval 😀
If you look at my other post, you’ll see that my tumble drier packed in as well, so I’m looking for a replacement for that as well. :sadder:
And no, I can’t afford an ISE10 tumbler – before you ask :rolls:
Re: Am I lucky or what?
Thanks Don,
Hey, I’ve just ordered an AW23 – so the ISE 10 Tumbler is a wee bit rich for me at the mo’.
I had thought that someone might have recommended the Bosch Tumble dryers but you have caome up with Zanussi. Any reason why?
Cheers
Re: Zanussi ZWF1430W No wash action
Well done that man :worthy:
The main control PCB is fried, several tracks and components all blown 🙁Is this time for a new machine?
Regards
