Forum Replies Created
-
Posts
-
OK thanks. I guess it’s not worth keeping then. One thing I liked about it is that it’s total height, i.e. the height of the surface of the glass was the same as the worksurface. Looking at some new ones and the burners sit high, and then the glass level is even higher. Mine has dark smoked glass so it hid the burners well.
The clock is for display only. You cannot time the oven or anything from it.
Plate on back says MOD: 050551109
PIN 87AS38
S/No: 20120720
G20 @20 mbar
I tried to upload a photo but it wouldn’t work.Re: Beko DRCS76S Stopped working – seemingly now dead
Checked the voltage with a multimeter and I have power all the way to the on/off switch but I don’t know how to check anything after that – i.e. the circuit board. I had hoped there might be some internal fuse that I could change.
Any help would be great – thanks
Re: Whirpool AWZ121 Replace Start Switch – Wiring Advice
I have now sorted this. For any future readers – the two greens go to the start switch and the other two go to the door reset switch on the right end of the unit.
Re: Whirpool AWZ121 Replace Start Switch – Wiring Advice
Just to add. I would have bought this unit from the links here but I am visiting my elderly mum and I ordered the part from Amazon on Boxing day and had it delivered next day. I want to get it fixed before I head home (350 miles away).
Also to add: One green ended wire and one cream ended wire terminate at the left hand edge of the main terminal block. The other two wires terminate over to the right of the block.
