[waters]

Re: tub repair

I will try to get Milliput,it sounds same as qualtex.It makes plastic stronger than original.Used it loads of times on washers and would not dare repair a drum and then sell a machine on.

[waters]

Re: tub repair

Milliput looks exactly the same,can you tell me where to get it,thanks

[waters]

Re: eBay parts prices

where would be the pictures from

[waters]

Re: hpt wf640

thanks

[waters]

Re: prices of Hotpoint tools

Price will depend ,same as anywhere of course

[waters]

Re: Scrap & Weee

When i get my licence and i take my washers to the scrap yard and get the paperwork how can i prove these were washing machines.The scrap reciept just says the weight and general scrap.So it is just my word that they were and how many.

[waters]

Re: Scrap & Weee

Cost will be covered by one trip ,we are getting £130 per tonne.Gave scrap to dealers for last 10 years but at this price been taking my own the last 6 months.

[waters]

Re: Scrap & Weee

Ok will get one anyway.Do you fill out a duty of care waste transfer note each time you collect a machine

[waters]

Re: Scrap & Weee

When i take a washer away after delivering a new one, the customer askes if i want there old one to do up,take parts off ,etc.So if i take that machine to my premises to work on that is my machine,quite often the customer will not let me take one away unless i give something for it,and because i sell recons i sometimes get them back off a customer i had sold it to 5 years ago for 100 quid.They pay another 100 quid and get a tenner back

[waters]

Re: Scrap & Weee

Just checked on Environment agency website and it says you qualify for an exemption if you carry waste that you have produced.So this is maybe what they meant .If i take a motor off a washer ,is it then my waste

[waters]

Re: Scrap & Weee

Spoke to environment agency today to two different people.One said we need one ,the other said if i take parts off machines to reuse then i am not scrapping complete machines ,so i do not need one.So to be sure i will get one.

[waters]

Re: Scrap & Weee

I was asked at local scrap yard before they accepted the scrap if i had a waste carriers licence or a shop.I am looking into it now because i had a day off yesterday and i had had a visit from people checking on Wee.They left be some paperwork and a contact card

[waters]

Re: Scrap & Weee

Are we absolutly sure we need a waste carriers licence if we have a shop.

[waters]

Re: wma

The rubber at the top of the leg does not fit snug in the gap ,allowing leg to move at the top and tap

[waters]

Re: wma

Yes the top ,where the peg goes through.As this is located to the drum there is allways movement back and forward,causing the tap.Opening the top slightly removes the gap and stops the tap.I do one wma bearing change a day and allways find this problem .

[Author]

Posts