Indesit DI620 – Please help :)

[iadom]

Re: Indesit DI620 – Please help 🙂

That is the correct part number.

I take it you have checked the heating element first?

Jim.

[chriswhy]

Re: Indesit DI620 – Please help 🙂

same question , need a console for my bfi620 s/n 61107 2996 similar s/n to the last post so would guess same part, but would like to check.

I have what looks like a fried slug across a capcitor diode and a resistor 🙂
going to look if it works with the dead slug removed, but that would be really hoping…

so close found another post saying
There are two different ones dependent upon serial number.
Before serial number 61020.0000 the PCB is a C00143206.
After 61201.0001 it is a C00143222.

so I am inbetween these 🙁

[iadom]

Re: Indesit DI620 – Please help 🙂

You’ve got your serial numbers a bit mixed up there. The one you need is a C00143222.

Jim.

[chriswhy]

Re: Indesit DI620 – Please help 🙂

the serial numbers for the parts is what i copied from another post. i just need to clarify it as it was confusing,

I take it that that part is available from whitegoods as the number does not show up on the parts

[iadom]

Re: Indesit DI620 – Please help 🙂

If you send an e-mail to spares@ukwhitegoods.co.uk you will get all the info regarding costs, delivery etc. 🙂

Don’t worry about the serial number mix up, just imagine how we as independents struggle, a few manufacturers would rather that we didn’t know either. 😉

Jim.

[chriswhy]

Re: Indesit DI620 – Please help 🙂

Aye I agree, now what do I do with my dead Slug….

[iadom]

Re: Indesit DI620 – Please help 🙂

Sauted with a little butter & garlic. 😉

Tastes just like chicken, or so I am told. 😆

[chriswhy]

Re: Indesit DI620 – Please help 🙂

Dam C00143222. they are not able to source it any more.. guess I will have to scrap it now..
Another one bits the dust…

oh some luck found another supplier
http://www.4hotpoint.co.uk/cgi-bin/prod … 0143222{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}2e

[iadom]

Re: Indesit DI620 – Please help 🙂

Not bad, only £11 over list price of £25. :rolls:

[chriswhy]

Re: Indesit DI620 – Please help 🙂

Who’s list price , whitegoods cannot get it and I have seen prices of upto £90 so far, trying all spares in Wigan at the moment….

[chriswhy]

Re: Indesit DI620 – Please help 🙂

Ok , found a £25 pluse vat price for the c00143222 but now told that it is for serials from 61129.xxxx etc which differs from the information that I have already as I have a machine with serial 61107.xxxx so being told by the hotpoint spares seller I should order the C00143206 part ????

Any more help on which before I possible waste my money on a non refundable part..

[iadom]

Re: Indesit DI620 – Please help 🙂

😳 My humble apologies.

Before serial number 61129.9999 module is a C00143206

After serial number 61130.0000 module is a C00143222

I was looking at the thread header, the Indesit DI620.

Jim.

[chriswhy]

Re: Indesit DI620 – Please help 🙂

phew,,, at least I not wasted any monies yet, but missed the order deadline for today, ure local ok for you to nip around and help with the washing up 🙂
thanks for all for advice, a few quid is better than a few hundred for a new device….

[iadom]

Re: Indesit DI620 – Please help 🙂

Might be local but I’m snowed in, took me a good while to get out this morning, really struggled to get back home later this afternoon. On the hilly side of Shaw, near to Saddleworth.

Jim.

[silentwitness]

Re: Indesit DI620 – Please help 🙂

Hi all

New to this forum, but it’s already been a big help. I have the flashing cycle 4 light too. I want to check the heater element before replacing the PCB. How would I go about testing the heater?

Many thanks

Col

[Author]

Posts