[A1applianceservice]

Re: Bosch D/W impellor jug question

Hi,

We’ve got a problem with a Bosch SGS45C02GB/09. At first the ‘check water’ light was on and the machine kept filling and emptying in a constant cycle.
We replaced the impeller jug (as advised everywhere on this forum) and also the ‘water inlet’ part no 434477 as it was clogged up with gunge.

Now the appliance drains, fills and fails to count down the remaining time. Could anything else be causing the problem? The ‘check water’ light now intermittently shows.

[A1applianceservice]

Re: Bosch Classixx Model SGS45C02GB/02

.

[A1applianceservice]

Re: Servicenet

Thanks for the info guys, we where contacted by them today. We will stay away

[A1applianceservice]

Re: CANNON 10450G DUAL FUEL RANGE COOKER

Hi Guys, thanks for your quick responses.

The clock cannot be set as the whole cooker is dead.

[A1applianceservice]

Re: Hotpoint Module AQ9D692UUKV

we tested the pressure switch as instructed on the link: viewtopic.php?t=69601#p341650

[A1applianceservice]

Re: Hotpoint Module AQ9D692UUKV

Hi guys, thanks for the replies and advise. We have done everything mentioned including resetting the pressure switch but it still wont solve the fault. The motor is running fine and the PCB has been programmed successfully. Not getting any pump action from the machine. We have even replaced the pump. any other suggestions?

[A1applianceservice]

Re: Hotpoint Module AQ9D692UUKV

Thanks for your reply. We tried what you suggested first before posting, but the machine is still faulty. The old module is blown and we have also tested a new pump on the machine. It fills with water, but no pump action. Even checked the pressure switch which is fine. There is no live from the module to pump and no breaks in wires. This is a puzzling one!

[Author]

Posts