[A1applianceservice]

Hi Dave and Simon,

I have checked the clearance between fan and element and its fine, I do wonder myself if something is vibrating due to the fan running but can’t figure out what.

Thanks

Jaz

[A1applianceservice]

Many thanks

[A1applianceservice]

Re: Bosch SMV65M00GB/44 Dishwasher

Thanks for the help guys. Not fixed the appliance but managed to sell customer a new dishwasher.

Jaz

[A1applianceservice]

Re: Bosch SMV65M00GB/44 Dishwasher

Hi
Have checked with my engineer and programmed module was fitted.
He pointed out that if he unplugs the display pcb lead from the main module, the dishwasher starts working. On refitting the lead its goes dead again.
Jaz

[A1applianceservice]

Re: Bosch SMV65M00GB/44 Dishwasher

Hi Dave

If unprogrammed module was fitted, would it still cause the dishwasher to be dead ?

Thanks

Jaz

[A1applianceservice]

Re: Bosch SMV65M00GB/44 Dishwasher

Hi Dave

I will check with my Engineer, thanks.

Jaz

[A1applianceservice]

Re: Bosch WAS32462GB

Hi

Tim, yes the OFF position is set at 12 o’clock. Thanks.

Martin, there were no coding instructions at all in the box.
Is it possible to get them from somewhere ??

Thanks Guys

Jaz

[A1applianceservice]

Re: Cda648fw/1 beko fridge freezer

Having the same problem with a Beko CDA648FW/1. Fridge contents being frozen. Engineer has replaced POT Board 4360635285, Module 4360620185 but fault persists. Engineer now wants to change the fridge sensor… lets see if this solves the problem! Does anyone have access to an exploded diagram?

[A1applianceservice]

Re: Maytag GC2224GEKB American Fridge Freezer

Hi Bob,

Thanks for your reply, I will get my Engineer to check your recommendation.

Jaz

[A1applianceservice]

Re: Bosch Dishwasher Drain Pump Change SMS53A12GB/55

Thanks very much guys, I’ll give it a go this afternoon!

[A1applianceservice]

Re: Bosch WTE84307GB/08

I didn’t take note of the Start/Stop LED i’m afraid. What are you thinking Martin?

[A1applianceservice]

Re: Indesit WIB111

Great stuff guys. Thanks for the email Colin

[A1applianceservice]

Re: 2014 Conference, March 7th, Coventry

What time is it starting at?

[A1applianceservice]

Re: hotpoint washing machine wf620 fault

We went out to a Hotpoint WF860P washer with F08. Fitted a new element and NTC sensor, still same fault. After reading this, sounds like advising the customer to buy a new machine…

[A1applianceservice]

Re: Indesit IWDC6143UK

Thanks Guys,

Have the same fault with the drain pump, will try the NTC stat first.

[Author]

Posts