Forum Replies Created
-
Posts
-
Re: New Hob Advice
Hi
Gorenje have just brought out a new induction hob with saucepan sensors.Like the look of it and a 5yr warranty also.
Bryan
Re: samsung de error code
Hi
If the door interlock has burnt out then the main PCB MUST be changed..This is a known problem and should be covered by samsung as it has a technical bulletin for it.
Bryan
Re: Premier Range Oven.
Hi travis
Do you have a picture of the thermostat you need ?
If you can’t upload it send it to samsung@ffrservices.co.uk as I may well have one.
Bryan
Re: COOLZONE FRIDGE FREEZER CZ51141
Hi
This sounds like a system fault which will need a refrigeration engineer visit.
Bryan
Re: samsung american twin cooling question ?
If its only about 2 yrs old then it’s probably a RSH1. What did the oil / refrigerant smell like when you opened the system ?. Common fault is the oil turns acid and the freezer evap gets blocked with crap from the compressor thus taking the new one out within hours or days.the oil would be a light to toffee brown colour.was you getting the system full of refrigerant ?.
Bryan
Re: ARROW F09001GB53 OVEN
I’ll have a look but i’m 90{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} sure that they’ve all gone and if I havent got it.. nobody has.
Bryan
Re: Finding the sensor, 9590142 – Liebherr Fridge
Hi
The whole appliance will need to be removed from its housing and it is fitted from the rear and then slipped into the holder on the rear panel which yes does need the fan to be removed first.
Bryan
Re: Built in oven choice
I would have thought a 5 year warranty (like the Samsung) was more appropriate.
You need to have the 5yr warranty 😕
Bryan
Re: Gas Bill
Send them a blunt letter 2 words .. I’ll leave them to your imagination.
http://www.coronaenergy.co.uk/
Bryan
Re: Tricit bendix WDR1040w no spin.
Have a chat with EMW….me thinks its the timer unit,
thay play up and will do every thing other than the last spin….
canufixitRe: Bosch SM965e02uk/01
Yes its a SMS65E02UK/01, but no leak on the machine, or water in base, it usually shows the error fault as it enteres the last part of the final rinse.
