[adv]

oops 949716294 /05

[adv]

we black plastic things that swivel into place:rolleyes:

[adv]

just replace the hob .thats what i do .. not worth the hassle

[adv]

cheers but think this has a induction motor

[adv]

5 lights sorry which say which prog

[adv]

ahhh .was just a thought.

[adv]

take it they using the proper type of pots and pans :rolleyes:

[adv]

ok cheers;)

[adv]

It’s basically a old type whirlpool diplomat dishwasher

[adv]

electrofix wrote:interestingly the door lock is decribed as having a stronger spring

part no 1526377161

Dave

its 12 years old i noticed it mentioned stronger hinges . for heavy door panels ,, .mmmm cant be that after 12 years..you hear water pushing against the door at top when switches to top arm .. i take spray arm off . can hear water splashing at top like a jet .. but stays shut ok …. mmmm its as if the basket is getting pushed forward maby ? but arms go round fine , and cleaned holes .. should you get any water coming out where the arm swings round . ie where clicks on to spray arm ?as put whole arm on end off tap .. seems water coming out of where it spins round :rolleyes:

[adv]

electrofix wrote:have you checked the hinge has not been bent ever so slighlty so the last inch when the door closes it act like a spring trying to pull open the door

Dave

you mean hinges ie both sides ?or metal catch that door interlock catches on to ?

[adv]

just contacted cx says door doesnt fall past horizontal ..and stiil a slight bit of effort to push dishwasher door alway down .

[adv]

i didnt noticed the hindges being bent more than usual tbh. its this spraying of water against top . only when goes through top arm . i can see it trying to push open . it eventualy does..when take spray arm off its , fine

[adv]

O right .never heard of them .and seen one in 35 years in the game . probably a good thing 😉

[adv]

What is a hall sensor?

[Author]

Posts