Forum Replies Created
-
AuthorPosts
-
Alanj
ParticipantRe: Fisher & Paykel drawer dishwasher DD603HFC. RKM744955
Hi John, unfortunately the customer does not have the instruction book. The former owner did not oblige by leaving them. Do you know if they are available online?
Alanj
ParticipantRe: Whirlpool 3RLSQ8033RW2
Thanks Dave! Sorry missed part number in first post.
Alanj
ParticipantRe: Whirlpool 3RLSQ8033RW2
Hi Dave, do you know part number for clutch?
Alan
Alanj
ParticipantRe: Tricity Bendix Cooker SE553W prod 948522111
Hi Bob, no the switch is the original.
Alan
Alanj
ParticipantRe: Tricity Bendix Cooker SE553W prod 948522111
Thanks Jem, but if connected in the same order to the new element the element does not regulate correctly.
Alan
Alanj
ParticipantRe: Tricity Bendix Cooker SE553W prod 948522111 Ser 50300018
Here are photos of original and replacement element in hope someone can help.
http://img33.imageshack.us/img33/2032/imagenlis.jpg
http://img266.imageshack.us/img266/2968/imageidr.jpg
http://img59.imageshack.us/img59/5991/imagexbj.jpg
http://img825.imageshack.us/img825/3952 … 867676.jpg
http://img201.imageshack.us/img201/4886 … 957108.jpgAlanj
ParticipantRe: Tricity Bendix Cooker SE553W prod 948522111
No Electrolux specialists out there?
Alanj
ParticipantRe: ISE10 1606
Does anyone know what components go faulty on the 1606 motor inverter board. Anyone tried repairing one?
Alan
Alanj
ParticipantRe: ISE10 1606
Thanks Deltra.
Alanj
ParticipantRe: Card Payment facility incl terminal
£30 + vat. £36.00
Alanj
ParticipantRe: ISE 10 leak from soap drawer
After installing this machine at home and doing numerous washes now. I can report that there have been no more leaks from the machine! 😀
Alan
Alanj
ParticipantRe: ISE 10 leak from soap drawer
r600 wrote
[/Thank god i’m not the only one..thought I was going mad,Have you solved the problem ? alan ?quote]Hi Bryan, just to let you know, I have trimmed the siphon tube level with the back edge of the drawer and also taken a millimetre or so off the tube on the blue insert on the detergent compartment and seems to be siphoning ok now. The conditioner one works ok.
Alan
Alanj
ParticipantRe: ISE 10 leak from soap drawer
Hi Bryan, no I have not solved the problem as yet.
When I changed the drawer originally the leak was down the inside of the front panel and was clean water. The leak this time leaves a soapy residue down front of machine.
It is a puzzle.Alan
Alanj
ParticipantRe: ISE 10 leak from soap drawer
Hi Byran, I’ve just tried the same with a drawer I changed a few months back. I found that the liquid detergent side did not start siphoning straight away and the water leaked out into the comfort section (which did syphon), and also around the edge of the drawer under the plastic cover. This could also be causing the leak at the drawer front.
Thanks Bryan.Alan
Alanj
ParticipantRe: ISE 10 leak from soap drawer
Hi Martin, surely it should not leak at all?
Alan
-
AuthorPosts
