Forum Replies Created
-
AuthorPosts
-
Alanj
ParticipantRe: neff thermostat
Abbots,
have you tried BSH APPLIANCE CARE, they are the main bosch, neff supplier. As trade you will get discount 15 or 20{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}.
Alan
Alanj
ParticipantRe: Stoves range
Hi clivejameson,
I don’t think that’s the right model no.Looks more like a serial no.Are there no other numbers on the range?
Alan
Alanj
ParticipantRe: Indesit WIA121UK Flashing wash LED
Hi John,
I recently posted same question and got no replies. It’s the pcb you’ll have to replace £39.90 + vat from EMW or £49.96 + vat from Connect.
HTH.Alan
Alanj
ParticipantRe: Hotpoint WMA40P door lock light flashing
Hi Robwash,
you will probably find the board has blown tracking. Replacement board from EMW will fix it. £34.90 + vat.
Alan
Alanj
ParticipantRe: Indesit WIA111
Just to update, it was the module that was faulty.
Alanj
Alanj
ParticipantRe: Bosch Dishwasher
Hi Dave,
thanks for the prompt reply. I’ll check out what you suggest and let you know how I get on.
Alan
Alanj
ParticipantRe: Ariston LSI68A
Hi Jim,
thanks for the reply.
Alan
Alanj
ParticipantRe: Diplomat ADP8252
Thanks Mike1 for the reply.
Alanj
Alanj
ParticipantRe: ice maker in lg american f/f
dealdd,
what model is it. There are settings on the main board for filling the tray.Alanj
Alanj
ParticipantRe: LG GRL207DVZA
Hi Guys,
just to update you on this appliance. 😀 Have solved the problem – I removed hinge cover on top of door, disconnected the plug between main module and door display module for 30 secs then reconnected. Freezer is dispensing ice and crushed ice ok again. Can only assume something caused main module to lock up. 8)
Alanj
Alanj
ParticipantRe: LG GRL207DVZA
Hi helo_75,
is that the main pcb or the display?
Alanj
Alanj
ParticipantRe: LG GRL207DVZA
Are there no refrigeration specialists with an answer to my problem?
Alanj
Alanj
ParticipantRe: LG GRL207DVZA
Hi Bobhope,
I did get your e-mail, but find the LG manual a bit hard to follow.
Alanj
Alanj
ParticipantRe: LG GRL207DVZA
Has anyone got an idea on this fault? 😥
Alanj
Alanj
ParticipantRe: Hotpoint FEW12P repeating spin
Hi Donmact,
have you checked the motor wiring for chafing on front concrete balast block,pressure switch fault? 😉
Alanj
-
AuthorPosts
