Page 8 – UK Whitegoods

Forum Replies Created

Viewing 15 posts - 106 through 120 (of 757 total)

← 1 2 3 … 7 8 9 … 49 50 51 →

Author

Posts
November 19, 2015 at 12:44 pm in reply to: WMFG8537GUK Hotpoint steam washing machine heater #432446

Alanj
Participant

Re: WMFG8537GUK Hotpoint steam washing machine heater

£36.81 +vat at Connect.

November 19, 2015 at 12:37 pm in reply to: Bosch/ Siemens SN25M830UK/01 Dishwasher leaks ? #432884

Alanj
Participant

Re: Bosch/ Siemens SN25M830UK/01 Dishwasher leaks ?

I feel your pain Clive. Had a few of these myself. Have spent hours looking for leaks. I don’t know if they leak more when there’s a load in them, have not checked with load. Usually the seal between stainless tub and plastic base though.

Alan

November 19, 2015 at 12:30 pm in reply to: Zanussi ZKI225 Prod 914606007/03 #432860

Alanj
Participant

Re: Zanussi ZKI225 Prod 914606007/03

Anyone else out there got any ideas?

November 17, 2015 at 11:09 pm in reply to: LOFRA RANGE COOKER MODEL MXG96MFVC NO POWER TO OVEN/GRILL #432723

Alanj
Participant

Re: LOFRA RANGE COOKER MODEL MXG96MFVC NO POWER TO OVEN/GRIL

Also

November 17, 2015 at 11:08 pm in reply to: LOFRA RANGE COOKER MODEL MXG96MFVC NO POWER TO OVEN/GRILL #432722

Alanj
Participant

Re: LOFRA RANGE COOKER MODEL MXG96MFVC NO POWER TO OVEN/GRIL

If these can help 🙂

November 17, 2015 at 11:06 pm in reply to: LOFRA RANGE COOKER MODEL MXG96MFVC NO POWER TO OVEN/GRILL #432721

Alanj
Participant

Re: LOFRA RANGE COOKER MODEL MXG96MFVC NO POWER TO OVEN/GRIL

Hi Ally, the selector switch is the likely culprit. Had one of these a few months back. I had a bit of a problem with wiring to new selector switch(switches were completely different in appearance). They basically wired up like for like with connections though.

November 17, 2015 at 8:54 pm in reply to: Zanussi ZKI225 Prod 914606007/03 #432858

Alanj
Participant

Re: Zanussi ZKI225 Prod 914606007/03

Hi Clive, did you not try a repair of the board by changing the resistor?

Alan

November 17, 2015 at 4:47 pm in reply to: Zanussi ZKI225 Prod 914606007/03 #432856

Alanj
Participant

Re: Zanussi ZKI225 Prod 914606007/03

Hi, anyone got a service manual with a diagram of the board?

Thanks

November 17, 2015 at 4:32 pm in reply to: Zanussi ZKI225 Prod 914606007/03 #432855

Alanj
Participant

Re: Zanussi ZKI225 Prod 914606007/03

Board details

November 17, 2015 at 4:31 pm in reply to: Zanussi ZKI225 Prod 914606007/03 #432854

Alanj
Participant

Re: Zanussi ZKI225 Prod 914606007/03

Outer shell of resistor I could salvage.

November 17, 2015 at 4:29 pm in reply to: Zanussi ZKI225 Prod 914606007/03 #432853

Alanj
Participant

Re: Zanussi ZKI225 Prod 914606007/03

Photo of damaged resistor on board.

October 20, 2015 at 8:54 pm in reply to: Panasonic NA-147VB4. Error E04 #431743

Alanj
Participant

Re: Panasonic NA-147VB4. Error E04

Won’t know now, D&G written off machine.

October 20, 2015 at 8:48 am in reply to: Panasonic NA-147VB4. Error E04 #431741

Alanj
Participant

Re: Panasonic NA-147VB4. Error E04

Hi Seamy, the machine was already overflowing and going to E04 before I attended it. Valve only takes water in when program activated so it would appear triac on the board has gone faulty.
D&G have authorised new board for repair so here’s hoping diagnosis is correct.

Alan.

September 21, 2015 at 12:01 pm in reply to: Hotpoint C368EWH Cooker Diagram #430400

Alanj
Participant

Re: Hotpoint C368EWH Cooker Diagram

Hi A1, this cooker looks very like the C368EWH, so might help you with dismantling.
Hth.

Alan

https://m.youtube.com/watch?v=m_zrl7mELOM

September 4, 2015 at 11:03 am in reply to: ESSO Fuel card via CBS #427025

Alanj
Participant

Re: ESSO Fuel card via CBS

Hi Twicknix, how do you actually sign up for this card?

Alan
Author

Posts

Viewing 15 posts - 106 through 120 (of 757 total)

← 1 2 3 … 7 8 9 … 49 50 51 →