Alanj

Forum Replies Created

Viewing 15 posts - 121 through 135 (of 757 total)
  • Author
    Posts
  • in reply to: Fuel Card Scheme #430001
    Alanj
    Participant

    Re: Fuel Card Scheme

    Thanks Ken.

    in reply to: Whirlpool Top Loading Washer (3RLSQ8033SW0) #429849
    Alanj
    Participant

    Re: Whirlpool Top Loading Washer (3RLSQ8033SW0)

    Hi Aqua serve, fuse is T20 6.3 amp, 5045170872984 at connect £7.03 + vat.
    I’m sure I have bought them cheaper from RS Components. 10 for £2.00.

    Alan

    in reply to: samsung RSH1NHSW #429700
    Alanj
    Participant

    Re: samsung RSH1NHSW

    From what you are describing with the frosting, it looks like a lack of gas in the system.

    Alan

    in reply to: ISE AW23 #428987
    Alanj
    Participant

    Re: ISE AW23

    Thanks Don, as per Kens reply. That’s why I posted here. 😉

    in reply to: Panosonic NH-P80G2 #428685
    Alanj
    Participant

    Re: Panosonic NH-P80G2

    Had a look at your dryer and it looks identical to the Beko model I looked at.
    Have pm’d you.

    Alan

    in reply to: Panosonic NH-P80G2 #428684
    Alanj
    Participant

    Re: Panosonic NH-P80G2

    Hi Senseib, came across a Beko dryer of this type, but after posting was told unless it’s under warranty it’s probably a write off.

    Alan

    in reply to: Ignis ADL349 (D/W) #428677
    Alanj
    Participant

    Re: Ignis ADL349 (D/W)

    Hi Rocker, Ignis are basically Whirlpool machines, so check flashes against Whirlpool error codes. Hope this helps 🙂

    Alan

    in reply to: bosch dishwasher FC E14 #428679
    Alanj
    Participant

    Re: bosch dishwasher FC E14

    Hi Littleman, you have not posted model or ENR number which would have helped.
    Flow meter if installed on this dishwasher is located behind left hand side panel looking from front of machine. Once you have the side panel off look at bottom left hand corner below the metering, the flow meter(Impellor Jug) should be in hose between incoming water supply and metering tank. It could also be in the form of a reed switch built into metering tank. Not too expensive for either. The links below are for illustration only.

    https://connections.connect-distributio … shop=bosch

    https://connections.connect-distributio … eed+switch

    in reply to: Beko fridgefreezer CDA543F #428671
    Alanj
    Participant

    Re: Beko fridgefreezer CDA543F

    Anyone else confirm this?

    Thanks

    in reply to: rangemaster 110 professional plus #427367
    Alanj
    Participant

    Re: rangemaster 110 professional plus

    Here’s a useful link Johno.
    http://rangemaster.partsarena.eu/

    in reply to: Whirlpool oven. akp206 ix error codes #427213
    Alanj
    Participant

    Re: Whirlpool oven. akp206 ix error codes

    Connect have them in stock at £29.32 +vat

    in reply to: Whirlpool oven. akp206 ix error codes #427211
    Alanj
    Participant

    Re: Whirlpool oven. akp206 ix error codes

    Have sent info to e-mail on website.

    Alan

    in reply to: Whirlpool oven. akp206 ix error codes #427210
    Alanj
    Participant

    Re: Whirlpool oven. akp206 ix error codes

    Hi Paul, can you pm me your e-mail address. I have some info might help.

    Alan

    in reply to: Hotpoint HS2321L S/N 101194022 #427041
    Alanj
    Participant

    Re: Hotpoint HS2321L S/N 101194022

    Any Hotpoint/Indesit engineers help with this?
    Fitted a new electronic stat- part No. C00270327, but only thing that happens is all led’s light up and interior light works in reverse(interior light comes on when you close the door). Any help appreciated.

    Thanks
    Alan

    in reply to: Whirlpool dishwasher with 6 flashes, help please #427128
    Alanj
    Participant

    Re: Whirlpool dishwasher with 6 flashes, help please

    Serial number/ Bar code would be handy?

Viewing 15 posts - 121 through 135 (of 757 total)