Alanj

Forum Replies Created

Viewing 15 posts - 136 through 150 (of 757 total)
1 2 3 … 9 10 11 … 49 50 51
  • Author
    Posts
  • April 6, 2015 at 9:32 pm in reply to: Whirlpool 3RLSQ8033SW1. Ser CY2860166 #425783
    Alanj
    Participant

    Re: Whirlpool 3RLSQ8033SW1. Ser CY2860166

    New timer fitted and working ok. Hopefully no more problems.

    Thanks for the replies
    Alan

    March 24, 2015 at 9:19 pm in reply to: Whirlpool 3RLSQ8033SW1. Ser CY2860166 #425781
    Alanj
    Participant

    Re: Whirlpool 3RLSQ8033SW1. Ser CY2860166

    Thanks Steve, I did think this was the most probable answer.

    March 18, 2015 at 2:40 pm in reply to: Whirlpool AKZ161 – no power to main oven and display unit #425594
    Alanj
    Participant

    Re: Whirlpool AKZ161 – no power to main oven and display uni

    Twicknix do you have the product code from the barcode?

    February 10, 2015 at 10:57 pm in reply to: ISE 10 leak from soap drawer #390945
    Alanj
    Participant

    Re: ISE 10 leak from soap drawer

    Nice post Clive. Just what I described on previous post. 😉

    February 10, 2015 at 10:45 pm in reply to: w1607w leaking from soap drawer #422596
    Alanj
    Participant

    Re: w1607w leaking from soap drawer

    I agree, but worth a try. It worked for me. 🙂

    January 28, 2015 at 10:42 pm in reply to: w1607w leaking from soap drawer #422594
    Alanj
    Participant

    Re: w1607w leaking from soap drawer

    Have you seen this Mike?
    ise-trade-support/ise-leak-from-soap-drawer-t76041.html

    January 28, 2015 at 10:32 pm in reply to: ise w1606 stuck filling and emptying on 11 mins #424101
    Alanj
    Participant

    Re: ise w1606 stuck filling and emptying on 11 mins

    Syphoning??

    January 23, 2015 at 1:37 pm in reply to: Beko DPU 8360 W tumble dryer #423948
    Alanj
    Participant

    Re: Beko DPU 8360 W tumble dryer

    Chris only took photo of label on rear of machine with barcode on it. It’s a DPU 8360 W bar code
    5 023790 026314 if that helps.

    Alan

    January 23, 2015 at 1:34 pm in reply to: Beko DPU 8360 W tumble dryer #423947
    Alanj
    Participant

    Re: Beko DPU 8360 W tumble dryer

    Hi alro, no error code.

    January 22, 2015 at 7:17 pm in reply to: Beko DPU 8360 W tumble dryer #423944
    Alanj
    Participant

    Re: Beko DPU 8360 W tumble dryer

    Hi Chris, do you have the procedure to put it into diagnostic mode?
    Alan

    January 13, 2015 at 6:08 pm in reply to: Bosch Tumble dryer WTV74105GB/12. #423566
    Alanj
    Participant

    Re: Bosch Tumble dryer WTV74105GB/12.

    Maybe a dodgy relay on the PCB?

    December 30, 2014 at 11:08 pm in reply to: Miele W3444WPS Nr 00/68858037 #423058
    Alanj
    Participant

    Re: Miele W3444WPS Nr 00/68858037

    Hi Clayside, I managed to work that out and have been and fitted new motor brushes successfully. 🙂
    Thanks for the reply
    Alan

    December 11, 2014 at 9:37 pm in reply to: News #421719
    Alanj
    Participant

    Re: News

    Hi Ken, I have to say that I for one am very disappointed at the demise of ISE, despite the differing views we had about a certain machine. I bought into the concept of a better quality machine that would last a lot longer than most machines produced for the domestic market. A lot of my customers bought into it too, but I suppose the majority of consumers only look at the cost short term. I hope to retire by age 65 so I stopped pushing sales earlier this year because I couldn’t see ISE being able to honour the 10 year guarantee to customers in my area. Little did I know eh!
    I am not bitter towards you or ISE and hope things sort themselves out quickly.
    Hopefully we can get information on Asko parts that are suitable for use on the ISE range, or even ISE parts, to keep them in service

    Best regards
    Alan
    Happy Christmas

    December 7, 2014 at 8:56 pm in reply to: Samsung side by side RSH5UBMH S/N 10142BC500175J #422346
    Alanj
    Participant

    Re: Samsung side by side RSH5UBMH S/N 10142BC500175J

    Thanks for the reply Bob. Much appreciated.
    Customer already had this model replaced because of a succession of problems when under guarantee. This one hasn’t been much better but now it’s out of guarantee.
    She knows the engineer that does the Samsung repairs so think I will leave her to contact him.

    Thanks again
    Alan

    November 27, 2014 at 10:54 am in reply to: News #421684
    Alanj
    Participant

    Re: News

    Hi Ken, just as a matter of interest are the parts for ISE10 machines only suitable for them or are there Asko machines/spares compatible?
    Is it just that there will be no spares available warranty/chargeable full stop?

    Alan

  • Author
    Posts
Viewing 15 posts - 136 through 150 (of 757 total)
1 2 3 … 9 10 11 … 49 50 51