Alanj

Forum Replies Created

Viewing 15 posts - 151 through 165 (of 757 total)
1 2 3 … 10 11 12 … 49 50 51
  • Author
    Posts
  • August 18, 2014 at 7:26 pm in reply to: WTA Member ID Cards #356430
    Alanj
    Participant

    Re: WTA Member ID Cards

    Hi, any chance of getting a new ID Card? My one is getting a bit scruffy and worn. 🙁

    Alan

    August 18, 2014 at 7:15 pm in reply to: Bosch SGS45C02GB/11 pulses on and off #417860
    Alanj
    Participant

    Re: Bosch SGS45C02GB/11 pulses on and off

    Was at one today. I thought it might be the flow meter, but turned out to be fat blocking the hose between metering tank and sump hth.

    August 17, 2014 at 9:01 pm in reply to: Siemens washing machine #417282
    Alanj
    Participant

    Re: Siemens washing machine

    Hi Oscar, probably something jamming pump/blocking hoses or pump knackered.
    Alan

    July 30, 2014 at 11:00 pm in reply to: anyone good with rangemaster induction hobs? (e4) #417246
    Alanj
    Participant

    Re: anyone good with rangemaster induction hobs? (e4)

    Can you pm me your e-mail address?

    July 30, 2014 at 10:56 pm in reply to: anyone good with rangemaster induction hobs? (e4) #417245
    Alanj
    Participant

    Re: anyone good with rangemaster induction hobs? (e4)

    Hi gandh1, I had same sort of problem with Rangemaster Élan 90 last week. Have you tried reconfiguring the IHE’s? Depending on your model and serial number. I’ll send you some info by email. Also, I called Rangemaster technical and they are very helpful.
    http://rangemaster.partsarena.eu/2014-6 … /index.htm

    Alan

    July 18, 2014 at 3:13 pm in reply to: Range master Elan90 S/N 8940150161 #415193
    Alanj
    Participant

    Re: Range master Elan90 S/N 8940150161

    Hi Guys, I have tried reconfiguring the board but it won’t change from C1-C2.
    Zones 3,4 & 5 were working but after configuration they’re not.
    Got ring 3 to work but it works with zone 4 control. E+4 still flashing on display for zones 1 & 2. Rings 4 & 5 when selected scroll up the heat settings but then go to a u symbol with a score underneath as if there is no pan on ring.
    Any ideas rings or board or both?

    Alan

    July 17, 2014 at 8:32 pm in reply to: Samsung RS60DJSM S/N 238042BL800053R American side by side. #416768
    Alanj
    Participant

    Re: Samsung RS60DJSM S/N 238042BL800053R American side by si

    Thanks Bryan 🙂

    July 16, 2014 at 3:12 pm in reply to: Samsung RS60DJSM S/N 238042BL800053R American side by side. #416766
    Alanj
    Participant

    Re: Samsung RS60DJSM S/N 238042BL800053R American side by si

    Hi Bryan, have you got part number for that?

    Alan

    July 9, 2014 at 7:42 am in reply to: Whirlpool AKZ161/03/IX 858516115122 #416095
    Alanj
    Participant

    Re: Whirlpool AKZ161/03/IX 858516115122

    Hi Grendal, thanks for the reply. Do you know if board I’ve ordered is right for this oven? Have found 3 different part numbers listed.

    Thanks
    Alan

    July 8, 2014 at 1:47 pm in reply to: Whirlpool AKZ161/03/IX 858516115122 #416093
    Alanj
    Participant

    Re: Whirlpool AKZ161/03/IX 858516115122

    Anyone got configuration codes for this appliance power board? There are no resistors to cut on this board. Replacement board I ordered from Connect is part number 480131000151, is this the correct board? I have tried using the sheet included with the board to configure it but function switch instead of corresponding to the three functions and off settings, it has extra settings in between. Any help would be much appreciated.
    Thanks
    Alan

    June 19, 2014 at 4:25 pm in reply to: Range master Elan90 S/N 8940150161 #415191
    Alanj
    Participant

    Re: Range master Elan90 S/N 8940150161

    Thanks Mark. 🙂

    June 17, 2014 at 9:05 pm in reply to: Range master Elan90 S/N 8940150161 #415189
    Alanj
    Participant

    Re: Range master Elan90 S/N 8940150161

    Hi guys, been out to this range cooker. Two left hand induction ring don’t work display flashing E & 4 simultaneously. Other three rings ok. Any one got a parts and service manual for this? Please

    Alan

    April 8, 2014 at 2:18 pm in reply to: Beko BC50F S/N 1110178806 #412164
    Alanj
    Participant

    Re: Beko BC50F S/N 1110178806

    Fridge is freezing milk etc. any ideas?

    April 4, 2014 at 9:05 pm in reply to: ISE10 leaking from soap drawer #411267
    Alanj
    Participant

    Re: ISE10 leaking from soap drawer

    Hi Cras, have you tried trimming the siphon tubes?

    ise-trade-support/ise-leak-from-soap-drawer-t76041.html

    Alan

    February 20, 2014 at 10:08 am in reply to: WhirlpoolAKP262/IX 857726238500 #408495
    Alanj
    Participant

    Re: WhirlpoolAKP262/IX 857726238500

    Success! cheers Grendal

  • Author
    Posts
Viewing 15 posts - 151 through 165 (of 757 total)
1 2 3 … 10 11 12 … 49 50 51