Alanj

Forum Replies Created

Viewing 15 posts - 166 through 180 (of 757 total)
1 2 3 … 11 12 13 … 49 50 51
  • Author
    Posts
  • February 19, 2014 at 2:11 pm in reply to: W256W fitting front plate #409929
    Alanj
    Participant

    Re: W256W fitting front plate

    Having had to return because of slight leak at door, I layed the machine on its back.
    It was much easier to centre the front plates.

    Alan

    February 13, 2014 at 10:50 pm in reply to: BC50F S/N1110178806 #409451
    Alanj
    Participant

    Re: BC50F S/N1110178806

    Anyone got any ideas?

    February 12, 2014 at 10:06 pm in reply to: BC50F S/N1110178806 #409450
    Alanj
    Participant

    Re:Beko BC50F S/N1110178806

    Alanj wrote:Hi Guys, this F/F keeps freezing stuff in the fridge. Stat appears to be electronic but not sure where the sensor is located. Knob inside fridge has a small electronic board behind it which in turn plugs into connection on roof of appliance. There is a PCB located at rear top of machine with cabling running down inside insulation to motor and connections inside freezer compartment. There is a series of plug in connectors at back inside of freezer, one goes to what looks like a thermal fuse clipped onto pipe work ( box with 4 wires – 2 red and 2 white) the 2 white ones are not actually connected to anything where they plug in. And there is a small round capacitor style thermistor also attached to pipe work.
    Any one got an idea what my problem is and how to put it right?

    Alan

    February 10, 2014 at 10:33 pm in reply to: WhirlpoolAKP262/IX 857726238500 #408494
    Alanj
    Participant

    Re: WhirlpoolAKP262/IX 857726238500

    Thanks Grendal. Will give that a go. Received a technical bulletin regarding this fault and it says the same.
    Thanks
    Alan

    February 10, 2014 at 5:59 pm in reply to: WVD24460GB/02 #409039
    Alanj
    Participant

    Re: WVD24460GB/02

    Hi Martin, thanks but I sussed it out.

    Alan

    February 10, 2014 at 5:58 pm in reply to: Miele T284 tumble dryer #408937
    Alanj
    Participant

    Re: Miele T284 tumble dryer

    Hi Mark, it was indeed that small circuit board that had the fault.
    Thanks again
    Alan

    February 10, 2014 at 5:53 pm in reply to: WhirlpoolAKP262/IX 857726238500 #408492
    Alanj
    Participant

    Re: WhirlpoolAKP262/IX 857726238500

    Any whirlpool specialists out there got an answer to this problem please?
    Alan

    February 5, 2014 at 1:07 pm in reply to: Miele T284 tumble dryer #408936
    Alanj
    Participant

    Re: Miele T284 tumble dryer

    Thanks Mark!

    January 24, 2014 at 6:38 pm in reply to: Zanussi ZI921/8 FFA. Prod No. 925771721 #408142
    Alanj
    Participant

    Re: Zanussi ZI921/8 FFA. Prod No. 925771721

    Thanks Colin.

    January 24, 2014 at 11:47 am in reply to: Zanussi ZI921/8 FFA. Prod No. 925771721 #408140
    Alanj
    Participant

    Re: Zanussi ZI921/8 FFA. Prod No. 925771721

    How does the fridge regulate if it’s not frost free? There is no separate control for the fridge.

    Alan

    January 23, 2014 at 9:52 am in reply to: Zanussi ZI921/8 FFA. Prod No. 925771721 #408138
    Alanj
    Participant

    Re: Zanussi ZI921/8 FFA. Prod No. 925771721

    UPDATE! Must have planted a seed of doubt in customers head. Now thinks appliance is running constantly. Fridge compartment at around 10 degrees C.

    Alan

    January 23, 2014 at 9:02 am in reply to: Zanussi ZI921/8 FFA. Prod No. 925771721 #408137
    Alanj
    Participant

    Re: Zanussi ZI921/8 FFA. Prod No. 925771721

    Customer says appliance is working normally just fridge not cooling.
    Alan

    January 23, 2014 at 8:09 am in reply to: Zanussi ZI921/8 FFA. Prod No. 925771721 #408136
    Alanj
    Participant

    Re: Zanussi ZI921/8 FFA. Prod No. 925771721

    Not sure. Will find out.

    January 16, 2014 at 9:19 am in reply to: Miele Professional G7855 Fabr – NR 16/78706016 #407666
    Alanj
    Participant

    Re: Miele Professional G7855 Fabr – NR 16/78706016

    Thanks Don much appreciated.

    Alan

    December 11, 2013 at 9:00 pm in reply to: Masterfix service provider #406124
    Alanj
    Participant

    Re: Masterfix service provider

    Thanks Martin, got it.

  • Author
    Posts
Viewing 15 posts - 166 through 180 (of 757 total)
1 2 3 … 11 12 13 … 49 50 51