[alro]

Dave it shows up E40 but and the door is locked, spin and drains program work ok it only flashes as it reaches end of second fill up on wash or rinse progrmme you can hear like a relay drop out on pcb cheers alan

[alro]

thanks dave

[alro]

thanks dave for looking cheers alan

[alro]

hi gents anyone got a manual for the RZA30 to see if you can change the door seal cheers alro

[alro]

thanks dave cheers alan

[alro]

thanks yes i did put down tcd should be tdc sorry alro

[alro]

thanks Dave that should do the job cheers alro

[alro]

thanks dave passed back to customer as no can do

[alro]

thanks dave coil wire broken in door lock but only 2 bleeps cheers alro

[alro]

Dave its not got a compressor according to model number in.Its a heater element so it could be the relay on board so e22 is a heat fault hopefully cheers alro

[alro]

Nick did you fit the correct part number heat pump alro

[alro]

thanks dave

[alro]

thanks dave and K this will help me cheers alro

[alro]

thanks dave worked after about 10 goes cheers alan

[alro]

thanks dave humid sensor u/s cheers again for the help alan

[Author]

Posts