[alro]

Re: Smeg DWI710E1 cannot programme

Chris
does that mean to say that resetting of the appliance is wot to do or the error is e1 as the aqua stop is ok , noen 1 is on constant & not flashing but noen 5 is flashing & not on constant i am tending to think of a pcb failure
cheers alro

[alro]

Re: ignis ADL347 854534715410 Fills then empties

CHRIS & BRYAN
thanks for reply flashing 1&2 is the code for flow switch fault as per sios disc f5 no pause bryan the base looks as thou its came out of a show room new no leaks, have taken side chamber off and flow switch spins ok seems to be like new does any body how to test the switch. WI switch makes 1to3 empty then with water in 1to2
cheers alro

[alro]

Re: CDA 494/1 DISHWASHER WONT STOP FILLING

chris
is that on the left side at base of plasic side tank & do these go never needed to change one or is it a chamber change
cheers alro

[alro]

Re: DYSON AUTO WASHER MOTOR

hi
removed all holding self tappers from plastic lugs but motors refse to budge can not gain access to back of motors no room to shock them off
cheers alro

[alro]

Re: Hotpoint f/f defrost alert

cheers for info on sticking valve
but is the unit r600a so how can you braze the valve in and not go up in smoke or am i over re-acting as i have one to fit worried about outcome lerch
cheers alro

[alro]

Re: HELP fridge AEG SANTO 3688

Bryan
thanks for contact, in the fridge there are 4 removable panel at back that exposes the evap which gets a build up of ice the evap is 4 inch in width fins about 42 inch in length the fan sites above and blows the cool air through the 4 panels air ntc on side wall & ntc sits on base of evap the ice build up cames through the panels after about 10 days
cheers alro

[alro]

Re: Trewax vacume spares

hi gents
model number 380e on base but partnumber are up008203 and up008103
thanks alro

[alro]

Re: Diplomat adp8352

HI
thanks for part number dales where do i go for one & cost
cheers alro

[alro]

Re: diplomat ahy3601

chris
dont have an account with masterpart do you have a contact number
cheers alro

[alro]

Re: Zanussi ZWF or S 1650 go to end within seconds

Chris
turned out to be a dry joint on the main pcb
thanks for the file i have a different email address but do not know how to up date it on this site thanks again as suggested by paul PGS
cheers alro

[alro]

Re: wd12x uk eprom, module help!

dna
just tell EMW model number and they will send you a recon board with 12 months guarentee phone number 0115952118
cheers alro

[alro]

Re: fault codes pdf

ALRO HERE
I WOULD LIKE A COPY PLEASE
CHEERS

[alro]

Re: OCEAN FROST FREE FREEZER

K
Thanks for the mail it helps
do you have any contact is it brandt or ocean phone number there must be a tech differance
alro

[alro]

Re: OCEAN FROST FREE FREEZER

thanks for info
that is the part i fitted 43×8080 from connect but only comp runs no fan none of the three noen light re placed old one back in green neon light but nothing works is there a wiring mod to fit new pcb HELP
cheers alro

[alro]

Re: ZANUSSI DE6744S wash light flashing

wash neon flashing is water fill time has elapsed but it has been washing for 10 mins could it be syphoning itself out so that the level drops
or with it being an electronic board try on insulation brakedown on a component i have found the rinse aid sensor to be poor and P C B to do funny things
alro

[Author]

Posts