Ashby

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 159 total)
  • Author
    Posts
  • in reply to: Hotpoint HV6L 105 Washing Machine #430150
    Ashby
    Participant

    Re: Hotpoint HV6L 105 Washing Machine

    Yes, did megger it and all was ok?

    in reply to: Bosch Washer/Dryer. EN-R WVD245S3GB/03 #409692
    Ashby
    Participant

    Re: Bosch Washer/Dryer. EN-R WVD245S3GB/03

    Thankyou! Much appreciated. Sorry I asked!

    in reply to: Bosch Washer/Dryer. EN-R WVD245S3GB/03 #409689
    Ashby
    Participant

    Re: Bosch Washer/Dryer. EN-R WVD245S3GB/03

    Firstly, I have looked! Can’t find error codes for this model!
    Secondly! Don’t be so Grumpy!

    in reply to: Meiko ECOSTAR 530F (dishwasher) #393611
    Ashby
    Participant

    Re: Meiko ECOSTAR 530F (dishwasher)

    Thanks for your reply.
    I will ask the customer in the morning.
    Sorry i posted this in the wrong one.Typical me!

    in reply to: Indesit WIXL163 Washing Machine #393291
    Ashby
    Participant

    Re: Indesit WIXL163 Washing Machine

    No, a recon board from EMW?

    in reply to: zanussi fride/freezer Mod.ZRB2630W Prod. No.925 886 501-02 #383900
    Ashby
    Participant

    Re: zanussi fride/freezer Mod.ZRB2630W Prod. No.925 886 501-

    Thanks Bob.
    much appreciated.
    Ashby

    in reply to: Hotpoint Dishwasher FDM 550 #380714
    Ashby
    Participant

    Re: Hotpoint Dishwasher FDM 550

    Hi,
    Has anyone got any ideas on this one?
    Thanks.

    in reply to: Electrolux Chest Freezer Model TC 145 #365609
    Ashby
    Participant

    Re: Electrolux Chest Freezer Model TC 145

    Thanks for your reply,Not sure what the compressor is? The relay is a 3 pin Ranco?

    in reply to: Domestic appliance diagnostic equipment #339672
    Ashby
    Participant

    Re: Domestic appliance diagnostic equipment

    Hi Martin,
    Sorry i haven’t answerd the replies.
    I have multimeters and Insullation resistance testers.
    I was under the impression that there was more upto date equipment out there now?
    A customer recently was saying the last engineer who went there, plugged a laptop into the back of the machine to diagnose the fault?
    that is what made me ask?
    Perhaps i’m just behind with technology?
    Many thanks.
    Ashby

    in reply to: Haier washing machine HW=D1470TVE ME #332511
    Ashby
    Participant

    Re: Haier washing machine HW=D1470TVE ME

    Hi, Does anyone have a part for this machine please and the cost.
    Many thanks.
    Ashby. 07821260757

    in reply to: Haier washing machine HW=D1470TVE ME #332509
    Ashby
    Participant

    Re: Haier washing machine HW=D1470TVE ME

    Hi Thanks for your quick reply. How much is this part please?
    Many thanks.
    Ashby

    in reply to: Haier washing machine HW=D1470TVE #330474
    Ashby
    Participant

    Re: Haier washing machine HW=D1470TVE

    Hi, does anyone know where the best place is to purchase a motor for this machine? I’ve tried Masterpart and Connect without success.
    Many thanks.
    Ashby.

    in reply to: Haier washing machine HW=D1470TVE #330472
    Ashby
    Participant

    Re: Haier washing machine HW=D1470TVE

    Thanks for your quick reply, will check it out.
    much appreciated.
    Ashby

    in reply to: Hotpoint fridge/freezer Mod. FF187E #329787
    Ashby
    Participant

    Re: Hotpoint fridge/freezer Mod. FF187E

    Many thanks for your help. Will try that.
    Ashby.

    in reply to: Carlton Quatro commercial dishwasher #319642
    Ashby
    Participant

    Re: Carlton Quatro commercial dishwasher

    Hi Thanks for your help.
    Will check that when i go again.
    Many thanks.
    Ashby 😀 :

Viewing 15 posts - 1 through 15 (of 159 total)