[Ashby]

Re: miele professional dishwasher Mod G7859

Hi, many thanks for your reply, it tuned out to be the washpump leaking.
Many thanks.
Ashby

[Ashby]

Re: Creda washing machine Mod W100 FW

Hi, Thankyou all for your help. I found a blown track. Didn’t see it the 1st time i looked, time to take a trip to the opticians.
All repaired and working fine now.
Many thanks.
Ashby 😆

[Ashby]

Re: Creda washing machine Mod W100 FW

I’ve checked the board and can’t see a blown track? Will take a closer look.
Thankyou both for your help.
Ashby

[Ashby]

Re: Hoover washer/dryer mod HW120M

ok Martin. Will do. Many thanks for your help.
Ashby

[Ashby]

Re: Hoover washer/dryer mod HW120M

Thanks Martin, tried pressure switch,and vessel they seem ok?
Just strange it will only do it on the 3rd rinse? I put it on the rinse cycle several times and each time on the 3rd rinse it would just carry on filling?
Ashby

[Ashby]

Re: whirlpool Ikea Dishwasher DWH B10W

Hi Chris, thanks for your reply. It drains fine? I did notice that after the draining it wouldn’t fill? but then other times it will fill ok,start to wash and then the fault comes up? does’nt always take the wash powder either?
Ashby :rolls:

[Ashby]

Re: Stateman XT5 Washing machine?

Hi Steve, Thanks for your help.
Ashby.

[Ashby]

Re: Bosch washing machine Mod WFS4030 ENR 4030GB/02 FD 74080

Thankyou for your replies. The customer phoned this morning and said it’s working fine again??
The only thing i didn’t check was the brushes. Maybe a pcb fault? If anyone knows the answer to this problem i would pleased to hear from you. I have a feeling it wont be the last i hear of this one.
Many thanks.
Ashby :waving:

[Ashby]

Re: Bosch washing machine Mod WFS4030 ENR 4030GB/02 FD 74080

Hi, Thanks for your replies.
Yes, it does seem to behave as though the water is at the correct level, but i don’t think it is actualy heating?
I don’t think there is a breather hose from the dispenser to the tub?
Thanks again.
Ashby

[Ashby]

Re: Beko Washing machines Both WMA1512

Hi Jazz, Thanks for your help. I sent both modules to EMW for testing and they came back with no fault found. Didn’t try timers though.
Maybe the second one does do a 90 degree wash? i don’t know? I’m just going by what the customer tells me. She say’s she puts it on a 90 degree wash and it goes round to number 5, which is a 40 degree wash?
I will try the 90 degree wash on the other machine tomorrow and see if that does the same.
Will let you know.
Many Thanks for your help.
Much appreciated.
Ashby

[Ashby]

Re: Beko Washing machines Both WMA1512

Anyone familiar with these Beko Machines?
Many Thanks.
Ashby

[Ashby]

Re: Beko Fridge/Freezer Mod.CDA 653F

Hi, Thanks for your help. Will try that.
Ashby

[Ashby]

Re: Zanussi Commercial Dishwasher LS10 PNC9730 504118 01

Hi John, I’ve sent you a PM.
Many thanks.
Ashby

[Ashby]

Re: Zanussi Commercial Dishwasher LS10 PNC9730 504118 01

Hi, I’m still trying to find out what the C8 error code is on this machine? Would be most grateful if any knows anything about this machine or where i could find out.
Many Thanks.
Ashby

[Ashby]

Re: Zanussi Commercial Dishwasher LS10 PNC9730 504118 01

Hi, Any help with this one would be most appreciated.
Thanks.
Ashby 😥

[Author]

Posts