[Auldyn]

Re: Neff Induction Hob

Hi
pan is not registered display remains exactly the same flashing zeros then changing into dashes until it fades away.
I have replaced a couple of capacitors on the coil driver boards that were starting to bulge but that made no difference it would appear that the display board has been corrupted god knows how much that is to replace!! I don’t seem to be able to find one anywhere to price it.

[Auldyn]

Re: Neff Induction Hob

Checked for that no child lock on heat value 1-9 can be programmed into each hob but display constantly flashes and no hob will activate it’s as if the led control power supply is failing “cycling” as soon as it switches on.

[Auldyn]

Re: LG F1495BDSA Washing Machine

Hi thanks for that tip
I got to the bottom of this problem eventually the door hook that enters the interlock was catching the plastic edge of the door frame preventing it from pushing the interlock slider in fully.
I filed a sliver of the outer side of the hole with a needle file and it solved the problem the hook is under a lot of pressure with the spring behind it maybe the pin it pivots on had been slightly bent.

[Auldyn]

Re: LG F1443KD Washing Machine

Cheers thank’s for that it was the Hall Sensor

[Auldyn]

Re: LG F1443KD Washing Machine

not checked it yet is it a common fault with the same symptoms?

[Auldyn]

Re: Bosch WAP28360GB

sounds like it is the board then thanks.
The machine is 18 months old probaly out of garantee

[Auldyn]

Re: Hoover HNL7166

Already checked the heater with a Megger and it’s OK, will check the ntc tomorrow
Cheers

[Auldyn]

Re: Neff V5340X2GB/06 Open fault

Hi
Phoned customer and tried this but no success start button light flashes, still stumped with this one dont want to order a new control board if something else could be causing it

[Auldyn]

Re: Hotpoint BHWM129

Cheers will give it a try tomorrow

[Auldyn]

Re: Diplomat/Wpool ADP8322 Dish Washer

Been back to this one today, Bleeps when door is shut and led next to the start button flashes continuously on any program drain pump runs for about 30secs then stops but it still bleeps and flashes all the time.

Can’t seem to enter diagnostics mode it still continues through the same cycle as above.

scratching my head on this one!

any more ideas

Paul
Auldyn Electrics

[Auldyn]

Re: Whirlpool Draw Dishwasher ADG 2900

Thanks Chris
I was going to try Fisher Paykel on Monday

[Auldyn]

Re: Bosch Dishwasher SRS43C22GB/04

Thanks spotted it now it looks like a small solenoide valve not the usual small “fan blower”shape.

[Auldyn]

Re: Bosch Dishwasher SRS43C22GB/04

Thanks gandh1 site down for maintainance at the moment

[Auldyn]

Re: Whirlpool AWZ7913 Condenser Drier

Thanks SparkyP
It has 2 blue wires to heater and 2 white wires to NTC sounds like a write off if it needs a new heater and control board.
Thanks for your help

[Auldyn]

Re: Whirlpool AWZ7913 Condenser Drier

power cuts after 10 sec even when heater is detached the two thermostats are in the heater circuit, NTC sensor is attached via another plug and is seperate tried another NTC and it still does the same.
main control board looks ok and connectors fit firmly.
does not appear to be a heater or stat problem.

[Author]

Posts