Forum Replies Created
-
Posts
-
Re: Indesit/Hotpoint Smartreaders and Cards
as long as you get the correct smartcard for the appliance you should have a good success at programming the modules.
bob.
Re: Goodbyee, Goodbyee
good luck Richard, you will be a missed in the trade, enjoy your retirement.
bob.
Re: bush a128qb
the child lock has been activated,check the front panel or the user guide on how to deactivate it.
bob.
Re: bush A127qb Drain hose question.
thsts not part of the drain hose it will be from an old non return valve, just remove it.
Bob.
Re: Hotpoint FF200EA S/N 703200004
remove the freezer evaporator cover and you will find the reason, the lower air return vent will be blocked with ice.
bob.
Re: bush tdv6w vented dryer
these dyers will not work if the outside air temperature is below 9 degrees C.
Bob.
Re: Haier hw-c1470tve-u
the module has been fitted incorrectly, there is a small tab that needs to be snapped off and the module needs to be programmed for the correct model, I will try and dig out the way of doing this as its about 2 years since I last done it. LOL.
Bob.
Re: Candy W/D not spinning
earth leakage on the wash or dryer elements stop these machines from spinning.
Bob.
Re: LG F1403RD Washer/Dryer really noisey spin help needed
to be honest silverdale if you cannot revove the top of the machine i would call in the local repair agent as the repair is not as easy as you think.
bob.
Re: LG F1403RD Washer/Dryer really noisey spin help needed
just a simple removal of the top covers.
Bob.
Re: LG F1403RD Washer/Dryer really noisey spin help needed
it all depends if the bolts and screws have just come loose or are the mounting luggs broken off.
Bob.
