Forum Replies Created
-
Posts
-
If it has a breather hose from the tub to the soap dispenser it can be accessed from there, failing that its a tub split.
bob.
Its normally the main PCB, but if you changed that check the wiring to the motor, if that’s ok, its the motor. I have had both these fail with the same symptoms.
bob.
This is a split tub appliance, all parts should be available separately except the bearings which come with the back half tub, the drum spider is also part of the inner drum assembly.
There is a proper tool for this job, its a bit pricey, but I find it easy with just long nosed grips.
bob.
Re: Unprogrammed control PCB’s just interested
I have 2 X Gias Hoover/Candy mem loaders lying around collecting dust if any one is interested in them, they will need updating from the website, just PM me if your interested.
bob.
Re: Samsung WW10H9600EW/EU control module
You will need the serial number and version number to identify the correct part number.
bob.
Re: Panasonic NA-140VG4 undocumented error code?
Hi,
your H44 Error code means the drum has not rotated up to the correct speed it is more than 100RPM slow, possible cause is drum bearing failure or something trapped between the inner and outer tub.
bob.
Re: samsung rs21 water bottle replaced
You have fitted the water pipes the wrong way around. the air trapped in the tank is compressed by the water pressure and when the solenoid valve closes the air expands and continues to push the water out.
bob.
Re: Samsung DV70F5E0HGW Tumble dryer
Change the pump and the float sensor together, simple job they are both accessible from the back.
bob.
Re: Samsung fridge not cold, freezer cold
Have you checked the air return vent back into the freezer, it normally blocks with ice.
bob.
Re: LG Washer/dryer not drying
other than the obvious culprits heater and fan it will be a blocked condenser, remove, clean and reinstall.
bob.
