[BobHope]

Re: Panasonic Washing Machine Help

there is a motor that opens a valve on these washers and they always jam after a tub clean cycle, new valve required or you could just jam it open.

bob.

[BobHope]

Re: CURRYS KNOW HOW

i know of at least 4 system guys in my local knowhow outfit, so i would think they have a lot more than that nationwide.

[BobHope]

Re: bush w/m a126q

check the motor plug wiring.

Bob.

[BobHope]

Re: LG GR181SXA

hi JJ,

can not find a picture but i think its 6600JB1008A push switch.

Bob.

[BobHope]

Re: Lg f1222td5 service mode

Hi Mark,

PM me an email address and i will send you some info.

Bob.

[BobHope]

Re: LG WM1480FHD LE fault

change the hall effect switch sensor its a lot cheaper.

Bob.

[BobHope]

Re: error code EE with top horiz staff of first E mis

thermistor error tE.

Bob.

[BobHope]

Re: FF200 Defrost Modification

there was a mod out for that but i cant find it at the moment, im sure one of the hotpoint lads will have it, it was a larger defrost heater and a smartcard upload.

Bob.

[BobHope]

Re: Hotpoint Mistral freezer not freezing

hi gibbins73,

the p45 post is dated from 2006 so i doubt if you will get a reply from him, but if you look below this posting there is some help, if that does not help you the first thing you should do is a 48 hour manual defrost, switch off the appliance and leave the doors open, then try again.

Bob.

[BobHope]

Re: Hotpoint C00272306 smartcard reader

Bump,

no one interested before it is put onto ebay.

Bob.

[BobHope]

Re: Off topic – Caravan servicing – LPG gas and electric che

you have to be gas safe if the LAV or RPH or boat is hired out, if only the owner uses it then the landlords gas safety certificate is not required, as for the course that you linked to suggests there is another body that side stepped the gas safe regs, and is for servicing only so he is not able to issue a landlord certificate. I was not aware of that and do apologise for any confusion.

Bob.

[BobHope]

Re: Off topic – Caravan servicing – LPG gas and electric che

if he is doing it for profit he needs to be gas safe with the lpg module and the LAV module and the modules for all the appliances he is checking. I know as I have just sat that test and completed for the second time yesterday.

Bob.

[BobHope]

Re: lg gra207cvba

the compressor compartment condenser fan has failed or blocked.

Bob.

[BobHope]

Re: lg gra207cvba

the freezer display will show ER and the fridge display should be showing the error code.

Bob.

[BobHope]

Re: PCB Push Button

what kind of soldering iron are you using, try a 15 watt antex iron and you will soon get the hang of it, just remember some of the tactile switches are soldered right through the dual pcb and need to be heated from the reverse of the pcb on which they are mounted.

bob.

[Author]

Posts