Forum Replies Created
-
AuthorPosts
-
BobHope
ParticipantRe: Whirlpool washer dryer awz410
pm me your email address and i will send you some info.
Bob.
Email sent, Bob
BobHope
ParticipantRe: lg w/dryer
Hi ADV,
the front panel comes off just like a Bosch on some models and the later ones the bottom plinth comes off for access, do you have the model no. ?Bob
BobHope
ParticipantRe: Whirlpool washer dryer awz410
do you have the product code starting with 85 as there is a load of differant versions of that model.
Bob.
BobHope
ParticipantRe: Daewoo drum problems?
quite a common fault on them, if you can get the inner tub to turn you can tighten the bolts back in to the spyder by removing the heater, done a few like that.
Bob.
BobHope
ParticipantRe: Propane Gas Cooker
bottled propane and butaine are both LPG family liquid gasses, slightly differant operation pressures but with gastap bypass adjustment them jet should be ok.
Bob.
BobHope
ParticipantRe: beko de3542 fs not heating water
Hi Slyp98
pm me your email and i will send some info.Bob.
BobHope
ParticipantRe: Candy CDi 1012/1-80 (32900082)
part number 41006831, but its a bit hard to find the heater, pm if you need info.
Bob.
BobHope
ParticipantRe: Howdens hja8703
pm me your email and i will forward a tech bull on this.
Bob.
BobHope
ParticipantRe: Daewoo FRS2021WAL
Email sent.
Bob.
BobHope
ParticipantRe: Daewoo FRS2021WAL
Hi Chris,
the capacitor is the main compressor run capacitor and will upset the micon board if its arcing internaly.pm me your email address and i will foward some info.
Bob.
BobHope
ParticipantRe: Whirlpool ART 496nfv
i dont have access to an exploded diagram but i think this model has a diverter valve fitted in the gas flow from fridge to freezer. (whirlpool agents may conferm this)
Bob.
BobHope
ParticipantRe: bosch d/w shv43a03gb/44
possible the diverter valve/wheel is blocked or failed its part of the eater box.
Bob.
BobHope
ParticipantRe: DAEWOO FRSU20FAI PARTS REQ
PM me an email address John and i will send you some info.
Bob.
EMAIL SENT.BobHope
ParticipantRe: DIAMOND H TO INVENSYS CONVERTION
have a look here.
it might help.
viewtopic.php?f=3&t=13199#p16644.Bob.
BobHope
ParticipantRe: hotpoint RFA 08 compressor v. hot and not working
info sent.
Bob.
-
AuthorPosts
