Forum Replies Created
-
Posts
-
Re: Hoover Quattro AS110 Carbon Brushes
You may want to double check but I make it part no. 97916670.
Pattern part no. CBN9210 from Connect.Bryan
Re: Bosch HBN435AGB/01 Oven
Brains
Are you looking at the up to date SEME CD (sali 14)
As the lads said 096825 at 39.95 plus vat in stock.
Phone them and quote above part no. if all else fails.Bryan
Re: Next time you phone for a Pizza delivery!
Martin
Most enjoyable that. Like a lot of other things, the lunatics have taken over the asylum.
cheers
Bryan
Re: Motor for a zan fl1016/a
I phoned Highmist last week with an enquiry and they told me that they no longer deal with reconditioned motors.They gave me tel. no. of the supplier 01484 645536.You could try them but I was not very impressed with the conversation I had, so decided to just pay the extra for a new motor.When I gave them the part no. they said “well it might be this one we`ve got here but not sure”.Enough said.
Bryan
Re: Hotpoint Condenser TDC30P
Martin wrote:
As we would do in the trade for you if you where to call one of us out 😀
Martin, I don`t understand this remark as we are in the trade forum 😕
You might want to re-read post top to bottom.
As I said I would have liked to remove float unit but very small kitchen and customer on a tight budget(as usual) 🙁Bryan
Re: Hotpoint Condenser TDC30P
Update on this dryer fault.
Removed black drain plug and too much water came out along with gunge/fluff etc.Carried out repair as described by recall(above).Water bottle valve was gunged up so restricting flow of water into bottle and actuating float switch.Would have liked to remove float unit for proper clean but it looks like a time consuming task 🙁 .Does drum need to come out for this?Thanks to all who contributed and argued on this one. 🙂
Bryan
Re: Belling 627wh
I`ve had that one as well.After I fitted new ring customer said it was working better than ever but on close inspection of original there was nothing wrong with it.Thankfully she paid the bill and I was off. 😆
Bryan
Re: Hotpoint Condenser TDC30P
FB Thanks again for your input but when you say fault may recurr it is obviously worrying. Is the proper fix( ie no recurrence)as Martin suggests removal and clean of float chamber.
I have no BG issues and you can tell me the TOC info.
Bryan.
Re: Hotpoint Condenser TDC30P
Thanks for yor help guys
Having spoke to customer again she thinks there is not as much water in bottle as normal.Going to job on Wednesday and I will let you know outcome.Bryan
Re: Hotpoint Condenser TDC30P
Martin, What`s your diagnosis and remedy to this fault please?
FB thanks for your input but pressing down float switch arm and hope for the best isn`t an ideal solution.This job is 20 miles out of town and I need to be sure of no recall.
Empty water light on when bottle less than half full.Dryer then continues but no heat.Since original post customer informs me that fault is intermittent. 😥
Thanks
Bryan
