Forum Replies Created
-
Posts
-
Re: Brandt Hob Problems – Is this Induction?
not sure if this induction,but i had one once with two rings suddenly stopped working.it was just a poor connection in the main switch on the wall.the flex had two lives and two neutrals.no go faults are usually simple to find.
Re: hotpoint df dishwashers
funny you should say about glass iadom.i recon 90{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} of these i go on is glass jamming the impellor.amazing how it gets past that filter system.
Re: New door seal needed
apm8721 relates to a servis machine but the numbers on the machine i dont know.beware of ordering with numbers in manual,not to be trusted usually.
Re: Neff d/w S4453N0GB/13
this is a strange one, not something silly like holes in the cuttlery basket,when you test it empty all is fine,but you know what customers are like,they wont mention that there knives and forks slip through.
Re: smeg slimline dishwasher dead
thanks eastlmark, i will ask the customer about that.module should be here on monday.
Re: Neff d/w S4453N0GB/13
i have a young engineer small enough to get inside with a torch,but iam not sure health and safety would be too happy that!
Re: smeg slimline dishwasher dead
had a good look on the pcb, no marks or dry joints
i think iam going to have to bite the bullet & try one.
cheers.Re: miele dishwasher lights flashing
thanks alot kwatt for the info you sent me.worked through the programming and reset last fault alert.now every thing is fine.
great to do the job myself and not have to send the customer to miele.
dont know how i ever managed without this site.CHEERS.Re: Neff d/w S4453N0GB/13
possibly junk in the wash pump impellor,that would cause low pressure although appear to be working.looked at exploded view,does’nt appear to be any half load solenoid.
