ChrisR

Forum Replies Created

Viewing 15 posts - 31 through 45 (of 401 total)
1 2 3 4 … 25 26 27
  • Author
    Posts
  • April 29, 2017 at 6:47 am in reply to: JDLV09. Prod no 916095241 #447267
    ChrisR
    Participant

    Re: JDLV09. Prod no 916095241

    Thanks very much for your input Dave.
    I’ll ask my customer to try a damp load.

    April 28, 2017 at 9:50 pm in reply to: JDLV09. Prod no 916095241 #447265
    ChrisR
    Participant

    Re: JDLV09. Prod no 916095241

    I know what you mean Dave but I thought the 20 min dry prog was like a vented drier operation.
    No attachment to pm.
    Thanks.
    Chris.

    March 28, 2017 at 6:08 pm in reply to: Bosch S5444X1GB/23 #446509
    ChrisR
    Participant

    Re: Bosch S5444X1GB/23

    Thanks very much Martin

    March 28, 2017 at 4:37 pm in reply to: Bosch S5444X1GB/23 #446507
    ChrisR
    Participant

    Re: Bosch S5444X1GB/23

    Sorry Martin I think I’ve described it wrong.
    It’s the seal that the motor pushes into in the sump.
    Chris.

    September 10, 2016 at 9:41 pm in reply to: Samsung WD1704RJN #440568
    ChrisR
    Participant

    Re: Samsung WD1704RJN

    Thanks.
    It’s been on order with Connect for over a week so I’m hoping it will appear soon.
    Chris.

    August 10, 2016 at 7:33 am in reply to: Samsung DV70F5E0HGW #440001
    ChrisR
    Participant

    Re: Samsung DV70F5E0HGW

    Thanks Lawrence.
    I think I’ll walk from this one.

    August 9, 2016 at 8:00 pm in reply to: Samsung DV70F5E0HGW #439999
    ChrisR
    Participant

    Re: Samsung DV70F5E0HGW

    Thanks Lawrence.
    Fault code is HE

    July 23, 2016 at 9:24 pm in reply to: Hotpoint WMEF742P(UK) #439604
    ChrisR
    Participant

    Re: Hotpoint WMEF742P(UK)

    Thanks Dave.
    I’ll ring them on Monday

    July 13, 2016 at 8:54 pm in reply to: Siemens HB90554GB/01 #439348
    ChrisR
    Participant

    Re: Siemens HB90554GB/01

    Thanks for that.
    I’ll double check but I’m sure it’s not that.

    July 13, 2016 at 7:28 pm in reply to: Siemens HB90554GB/01 #439346
    ChrisR
    Participant

    Re: Siemens HB90554GB/01

    Thanks Martin.
    I was thinking selector as the fan seems ok but as it’s very intermittent who knows.
    I’ll see what customer wants to do.
    Thanks again.
    Chris.

    July 13, 2016 at 6:14 pm in reply to: Siemens HB90554GB/01 #439344
    ChrisR
    Participant

    Re: Siemens HB90554GB/01

    Fan motor appears ok.
    It’s smooth running and shows no faults.
    Thanks for your reply.

    June 13, 2016 at 7:08 pm in reply to: Lec INTLF 600 #438554
    ChrisR
    Participant

    Re: Lec INTLF 600

    Thanks Don.
    Connect don’t list it so I’ve put in a part request.
    I’m told Lec are saying end of August before they can supply.
    I’ll check the number you’ve sent.

    January 27, 2016 at 9:34 am in reply to: Siemens SN65M031GB/03 #434807
    ChrisR
    Participant

    Re: Siemens SN65M031GB/03

    Yes module changed because of no heat fault.
    No fault codes and readings you supply are slightly
    higher than what I got

    January 27, 2016 at 8:25 am in reply to: Siemens SN65M031GB/03 #434805
    ChrisR
    Participant

    Re: Siemens SN65M031GB/03

    yes it was ok. Earth testing was ok.
    It’s a strange one.
    The water appeared tepid(it’s a cold fill) but never hot.
    I’ve rechecked connections etc.
    Do you think the heater may be at fault?
    Thanks Martin

    December 2, 2015 at 8:08 am in reply to: Bosch WTE 84105 #433298
    ChrisR
    Participant

    Re: Bosch WTE 84105

    Cheers Paul

  • Author
    Posts
Viewing 15 posts - 31 through 45 (of 401 total)
1 2 3 4 … 25 26 27