Forum Replies Created
-
Posts
-
Re: Bosch SGS4012GB/12 dishwasher sump leak.
aqualectric wrote
As for Martin – well, ahem, what can I say?
You never seen the series…
Grumpy old (repair) men 😆
Tony C
Re: Guess how she does it ? Contains tame female nudity …
Christ on a bike!!!!!!Don’t let Paul Daniels see this or Debbie will be down the job centre next week. :eeek:
Tony C
Re: Whirlpool American Td
😳
None of em. Bl**dy door switch worked fine when metering with the front panel off, but the pecker had worn a groove between the plastic inner and metal outer door. The switch worked momentarily and then flicked off again. Pecker bent down, problem solved. Thanks for input though, know this machine pretty well now!!!
Tony CRe: Miele T510 drier. door opens in use.
Thanks all,
Was indeed a dump truck full of sh**e in the restricted hose. 😀
When she was shown that the crushed/bent hose was the problem i got the usual ‘well it’s been ok for the last ten years’.
Customers eh!! You gotta love ’em.Tony C
Re: Miele T510 drier. door opens in use.
Cheers Gents,
This drier is in the tightest space possible and the vent hose runs under the units where it can’t be accessed. It ran ok once I’d got it out with the hose disconnected, but once back in it was opening all the time. I’ll go back and check the hose tomorrow.Tony C
Re: BEKO D2731 FW Dishwasher
Same model same thing. Anyone know the rating for this safety stat as Indeshute do a c00041086 78deg which is a quarter of the price on Masterpart. connect currently out of stock of the gen.
Tony C
Re: Prestige PR60BISOE grill element
Yep thats the one. Connect rang back today with the part number DEL062098004 which cross refs to the one I found.
WooHoo 😀
Tony C
Re: Prestige PR60BISOE grill element
Thanks Dave,
I’m going back with her rebonded door today (argued with me that the inner glass had always been that loose 😯 ) so I’m going to take the element out to match it. Neither of those are the same type, it’s a hinged type element which I think 5031689052245 on connect will do.
tony C
Re: Prestige PR60BISOE grill element
😥
Masterpart say if it’s not listed we don’t do it. Connect didn’t answer the email so when I rang the guy didn’t seem that interested, spent a while looking and then asked what sort of appliance was it for :con: .Tony C
Re: Nardi LSISH E4 Fault code
Theyr’e complaining that it never seems to heat up properly although seems to wash ok. they’ve been getting E4 for a year 😯 :con: .
Tony C
Re: Nardi LSISH E4 Fault code
Dave wrote
It’s some kind of fill error but the translation is very odd
Odd translations seem to be par for the course with much of the job lot integrated stuff I’ve seen recently. 😥
Tony C
Re: apm 6825 Ocean
When I went back the defrost heater is on constantly. Thermistor/ stat fault? I’m assuming they are foamed in though.
Tony C
Re: Midge Ure now works for Creda
And if he finds the one that works does he shout…
TERR..I..FFIC
Or when he’s got a tester out does he cry
PAT!!!!
😳Tony C
Re: INDESIT WE10UK
Have a pair of ‘modified’ long 90deg angle nosed pliers from a carboot. The jaws are about 2 inch long on the gripping edge so I thinned them on the grinder and bent them together at the end. Because of the length of the handles it pulls the two rings on the band togethereasily, till the hooks clip together. I still curse though…….because it’s an Indesit! 😉
Tony C
