[DAGAV]

Re: HOTP WDL / WML TRIPPING RCD ON SPIN

Anyone got anymore info or can help?????

[DAGAV]

Re: HOTP WDL / WML TRIPPING RCD ON SPIN

Yep motor changed, the motor on these machines are ceset.

[DAGAV]

Re: HOTP WDL / WML TRIPPING RCD ON SPIN

I’ve done that, it’s not just me that is having this problem but many of my colleagues too. I am seeing 1-2 a week with the same problem so have checked various parts and wiring.
i have spoken to Indesit and they update the settings file but this has not help as descibed in my previous post.
I was wondering if any Indesit Company guys on here that would know what causes this?

[DAGAV]

Re: HOTP WML TRIPPING RCD ON SPIN

Single phase motor and accross the range of WML machines and various Indesit too (I stand corrected, not WDL range of machines).
Models listed below:
Hotpoint : WMD740PUK.RA,
WMF760AUK.R , WMF760GUK.R, WMF760PUK.R
WMF740PUK.R, WMF740KUK.R, WMF740AUK.R, WMF560PUK.R , WMF540PUK.RA ,
WML760PUK.R, WML730PUK.RA, WML730GUK.R, WML560GUK.R, WML560PUK.R,WML540PUK.RA
HV7L145PUK, HV7L145GUK, HV6L105PUK, HV5L125PUK
Indesit: IWE7145SUK, IWE7145KUK,
IWD7145UK, IWD7145SUK, IWD7145KUK, IWD7145BUK, IWD6125UK, IWD5123UK
IWC6165UK, IWC6165SUK, IWC6153UK, IWC6145UK, IWC6145SUK, IWC6125UK
IWB6123UK, IWB5123UK,

[DAGAV]

Re: wdl520 and wdl540

Just thought i would post the outcome of this issue.
Have found that the dryer NTC’s short or have a low insulation resistance reading after being in use for a while, this causes the lights to flash (not a fault code).
Changed the dryer NTC and the machine works fine.

[DAGAV]

Re: wdl520 and wdl540

Thanks.
I’ll try that next time we see one

[DAGAV]

Re: is there no contact number for SERVIS anymore?

Yep thats right, i have tried all the numbers we have for servis uk and all numbers no longer work.
I know we still repair servis appliances

[DAGAV]

Re: SMEG HINGES FOR A1-5

Putting the pins in is the easy bit, it’s just trying to locate the hinges in the female hinges that isn’t

[DAGAV]

Re: SMEG HINGES FOR A1-5

Hi Martin (323) yer tried the pins. Just can’t position the hinges far enough back in to the female hinge to lock them into place so you can remove the pin. Its like they are too big and wont slot in past the front cabinet.

Hi Lawrence, I spoke to smeg and they have assured me the part number 931330815 is correct for the A1-5 but i will try the part you mentioned.

Cheers Guys.

Any more info appreciated

[DAGAV]

Re: hotpoint ctd00 heat fault ??

Is the High heat switch working, could be only half the element is energising?

[Author]

Posts