[Dave_Conway]

Re: moffat ms016

50206535002 🙂

Dave.

[Dave_Conway]

Re: rangemaster glass lid asyy

SEME will be able to get it for you, it’s listed on SALI but no stock 🙂

Dave.

[Dave_Conway]

Re: zanussi tc482 dryer

I would order both if pre-ordering to be honest, and add a couple of the bearing pads while you’re at it 😉

Only about £15 trade for the whole lot 🙂

Dave.

[Dave_Conway]

Re: INDESIT W103 WASHING MACHINE

Don’t forget the flashing light then check the codes in the known error code thread Dan 😉

100’s of posts on this problem on the site 😀

Dave.

[Dave_Conway]

Re: baucknecht wa 8988

Pressure switch faulty or blockage in the pressure system I would imagine.

Pressure switch is part number 481227128394 if it’s faulty.

Dave.

[Dave_Conway]

Re: Spares wanted

Connect’s part number 5031687669506 and in stock 🙂

Dave.

[Dave_Conway]

Re: Diplomat ADP8322

It’s nearly always the part that the tubes lock in to that gets damaged, not the one on top but directly beneath it.

Check there 🙂

Dave.

[Dave_Conway]

Re: Brandt Dishwasher Element

Looks like it, no-one else seems to have stock at the moment.

Dave.

[Dave_Conway]

Re: cygnet urn model 03a1d

Cygnet are the same company as Burco so Connect should have them, you can also see a couple here:

http://www.elementman.com/water_boiler_ … aptops.asp

Dave.

[Dave_Conway]

Re: HOOVER AL130

I would suspect the door lock to be honest, part number 90489300 (common part).

PCB is part number 97917157 if the lock is OK 🙂

Dave.

[Dave_Conway]

Re: Whirlpool k20 icemaker.

You can get most from their website:

http://www.whirlpool.co.uk

You can request one as well if they don’t have it listed 🙂

Dave.

[Dave_Conway]

Re: Zanussi door handle

iadom wrote:TDS doesn’t seem to recognise these numbers?????

It won’t, that’s the factory number, you need the number from the control panel 😉

Dave.

[Dave_Conway]

Re: not getting anywhere on finding these parts??.

So there is 😀

Who the hell are Whitebox ? 😆

Dave.

[Dave_Conway]

Re: Zanussi ZX79/5 Fridge Freezer – Fridge not cold

Yep, 48 hours is sufficient time for a total defrost 🙂

Dave.

[Dave_Conway]

Re: Zanussi ZX79/5 Fridge Freezer – Fridge not cold

Cactusbob wrote:Assuming this works, is there a likely cause of the problem?

If it recurs then yes, very likely there is an underlying problem but it may well be a one off 🙂

See how it goes after the defrost.

Dave.

[Author]

Posts