[Dave_Conway]

Re: WPL DRYER PART

It comes as a whole “control unit” inc the PCB etc.

Part number 4812 214 78989 at £113.59 ex VAT list :eeek:

Dave.

[Dave_Conway]

Re: CDSL

I thought this rang a bell:

http://www.ukwhitegoods.co.uk/modules.p … pic&t=5828

They have also it seems got a deal going with DSG (Dixons/Currys) as this site fronted by what appears to be Partmaster is also Connect at the back end running it:

http://www.partmaster.co.uk/cgi-bin/home.pl

Dave.

[Dave_Conway]

Re: smeg A2 element replacement

It won’t I’m afraid, no spare parts do…

There’s loads of info in the forums here though about replacing fan elements on cookers, the same basic principal applies 🙂

Dave.

[Dave_Conway]

Re: Beko DWD5410 Wash program stops

Can you check the model number please, BWD5410 or even BDW5410 (tried both) aren’t correct 😉

Dave.

[Dave_Conway]

Re: Belling Cooker Hood CHIM 70ss

Penguin45 wrote:Looks like it’s all supplied as part of the motor assembly – p/no CHIM60006.

It does 🙁

Price was over £100 last week, (someone else asked me for exactly the same thing)

Dave

[Dave_Conway]

Re: Rangemaster 110

Done 😀

Dave.

[Dave_Conway]

Re: hpt TD VTD00G

It certainly shows them as seperate parts, I would be tempted to order the hinges and the inner door to be honest, it won’t come to more than a tenner (trade) for all four parts (inc the handle).

Dave.

[Dave_Conway]

Re: DESPARATE FOR HELP

Have there been any signs of the door not locking correctly as the interlocks are prone to failure ?

Also, are any of the other lights on apart from the dashes in the main display window and the power LED ?

Dave.

[Dave_Conway]

Re: Anguis in herba

….Yertsen, Berksen :haier:

😥

Out of interest I looked up the word berk and found this:

http://en.wikipedia.org/wiki/Berk

:rotl:

Be prepared, extreme profanities 😉

Dave.

[Dave_Conway]

Re: smeg A2 element replacement

You need to do it from both ends 🙂

Dave.

[Dave_Conway]

Re: smeg A2 element replacement

clivers wrote:thanks Dave, do you know where i could get one of these elements from

Yes, right here from our shop – ELE4207 😀

Dave.

[Dave_Conway]

Re: smeg A2 element replacement

From the rear and from inside the oven cavity itself 😉

With the power off of course :zap:

Dave.

[Dave_Conway]

Re: Miele G660-2

Cheers :tup:

[Dave_Conway]

Re: Miele G660-2

Thanks, the customer doesn’t know how to tell 🙄 so I’ve asked him to send a picture.

Presumably the spray arm will have a hole straight through the centre if the middle spray arm is supplied from the roof inlet ?

Dave.

[Dave_Conway]

Re: Tricity Bendix dishwasher bizzare problem (not heating)

The hard substance is limescale by the sound of it, hence my suggestion of descaler 😉

Dave.

[Author]

Posts