Forum Replies Created
-
AuthorPosts
-
Dave_Conway
ParticipantRe: Universal drain hose extension kits
Ah, sorry.
Personally I would never join two waste hoses together unless I really had to 😉
Dave.
Dave_Conway
ParticipantRe: whirlpool awm6111
See if it will enter the test mode, if that doesn’t work either it would indicate the control unit is at fault but at a little under £170 list price :eeek: you want to be sure.
To enter test mode:
Select the drain programme and wait for it to stop pumping, of the six buttons to the right of the selector – press the second from right twice then press the third from right twice it should now be in test mode, this is indicated by the two neons above the two buttons pressed on, 60C temp displayed and the spin speed max led on.
To get out of test mode, turn the selctor to any other position.
Dave.
Dave_Conway
ParticipantRe: Hoover Six.AAA Whisper 1600 AAA 160 Stopping cycle
Possibly an internal blockage then or it may be time to ask an engineer to attend, check the repairs@ link below.
Power off please if you do proceed further yourself :zap:
Dave.
Dave_Conway
ParticipantRe: Universal drain hose extension kits
The later Hotpoints are the exception mainly as they have the larger pump outlet.
Dave
Dave_Conway
ParticipantRe: indesit d/w
Without the model number it will be pretty difficult to check but if you read through the known error codes thread in this forum, the answer will be in there 🙂
Dave.
Dave_Conway
ParticipantRe: User Guide
Good idea 8)
Cheers
Dave.
Dave_Conway
ParticipantRe: Hover Nextra 7,5+5 Wash’n dry
Hi, model number please Alex 🙂
It’s inside the door on the rating plate 😉
Dave.
Dave_Conway
ParticipantRe: Ariston LI62 dishwasher fault
Second from the left (or LED 2) is a no fill fault, possibly the inlet valve, pressure switch related or blockages may cause this.
Power off please if you look further :zap: or if you’d prefer an engineer to check this out for you, check the repairs@ link below 🙂
Dave.
Dave_Conway
ParticipantRe: Zanussi DE6854
From previous posts regarding this fault, I would take the route of asking an engineer to attend to be honest as this could be due to a number of problems causing this fault to occur.
Check the repairs@ link below 😀
Dave.
Dave_Conway
ParticipantRe: Hoover Six.AAA Whisper 1600 AAA 160 Stopping cycle
Have you checked the outlet isn’t blocked anywhere (especially if the waste hose connects to the sink trap) ?
Dave.
Dave_Conway
ParticipantRe: Terim hob.
iadom wrote: Is there an alternative to a 6226105 regulator. 😉
Nope it doesn’t look like it 🙁
Dave.
Dave_Conway
ParticipantRe: AEG COMPETENCE 310 B-W INSTUCTION MANUAL NEEDED
It will be a PDF file, if you haven’t got the free reader installed you can get it here:
http://www.adobe.com/products/acrobat/readstep2.html
You’ll be able to open and print the ducument once installed 🙂
Dave.
Dave_Conway
ParticipantRe: Neff 6544WM Washing machine
The only model on the BSH spares site with 6544 in it is a top loader, I assume this is a front loader ?
Dave.
Dave_Conway
ParticipantRe: Norfrost twin Tub
Is this the AC2000 model that Connect list ?
Only a wash timer or spin selector listed, if it’s the timer won’t a Servis one do the trick (12 minute clockwork IIRC) ?
Dave.
Dave_Conway
ParticipantRe: Terim hob.
Masterpart are the appointed distibutor Jim but it’s not listed on their site for some reason 😕
An email to them should do the trick though 🙂
Dave.
-
AuthorPosts
