Forum Replies Created
-
Posts
-
Re: Stoves Oven
Nothing listed for this one I’m afraid.
If you have an account with Masterpart or Connect, either will be able to find this one for you though 🙂
Dave.
Re: Diplomat M8502 washing machine
20uf capacitor failure methinks 😉
I would try one, if it doesn’t work then module as Ken says 🙁
Dave.
Re: Masterpart TY14124
Sorry, I was comparing it to Connect’s ELE4001 which is 50p dearer than the genuine one from Masterpart 😕
No, we’re not 😆
Dave.
Re: Masterpart TY14124
Order the genuine one 3116448006 or 3110231002 as Mastepart still have the old part number listed, it’s cheaper 😀
Dave.
Re: Smeg DI612C E2
It sounds like the pressure switch is either faulty or badly adjusted from new if the level is reaching “flood” before it switches the valve off.
Part number is 816210325 if you want to give that a go
Dave.
Re: Creda Oven door fouls on casing and jumps off
In that case it can only be the hinges, taking a photo of the oven and posting a link to it here may help identify the model more accurately 🙂
Dave.
Re: Creda Oven door fouls on casing and jumps off
It sounds as if the lower door glass brackets have come unglued to me making the glass swing outwards at the bottom fouling the cavity.
Where you found the 103…. number is where the model will also be, it may be obscured by the door seal and will be called a “spec” number quite often.
Although you may just need to reglue the door brackets to the glass if you remove the door and have a closer look 🙂
Dave.
Re: Holmark oven door hinges
Ah, yes the green “colonial” things, those are Nardi. They have a porthole type door glass.
Model number is likely to be be 0*-700105 or similar, the hinge is part number 031199009917R
But don’t blame me if it’s wrong 😆
Dave.
Re: The Lads Done Good
Del wrote:So I just want to say credit where credit is due. Well done Ken & Kev.
Indeed 😀
Dave.
Re: Holmark oven door hinges
Without a model for a Homark you’re a bit up a brown coloured creek without a paddle to be honest 🙁
As it’s 10 years old it will almost certainly be Brandt manufactured, is it a single built in ?
Dave.
Re: Tricity Bendix – ATB3310 Oven Door Glass
Got it thanks 😀
I’ll reply during the day tommorow as the site is down again, I think they must do routine maintence/updates during the night…
Swedes eh 😉
Dave.
Re: Whirlpool ARC5571 Problem
goonboy wrote:If not looks like a new fridge is in order 😀
I think that may be the case to be honest 🙁
The move may have damaged the thermostat capillary housing. For certain advice though, an engineer is the only option.
Dave.
Re: A couple of part nos required please…….
There is no lower door seal as such, only a drip guard, part number 1801629, if you haven’t been out to this one and the complaint is leaking in the corners of the door, it’s always the lower spray arm that splits causing this (Brandt manufacture)
Servis door handle is 322089700
Dave.
