Forum Replies Created
-
Posts
-
Re: Homark Oven User Manual
Again, it’s too old I’m afraid 🙁
This link may help, and any future readers:
http://www.caremarkspares.co.uk/insbooks/
This is all that is available for Homark ovens now, most of the symbols will be useful as they are probably the same 😀
Dave.
Re: Homark Oven User Manual
I missed the post from Kat8, if you pick this up, I’m afraid you won’t get one for that model any longer, virtually everything is obsolete now 🙁
theduke – send me a picture of the oven to spares@ukwhitegoods.co.uk and I’ll see what I can dig out 🙂
Dave.
Re: Diplomat ADP 8224 Dishwasher E3 error
Rest wrote:Contary to popular belief there is no door Thermostat
Correct it’s a thermistor but definitely not invisible 😉
Dave.
Re: Partfinder just stopped.
iadom wrote:Does anyone have a phone number for the Trade Spares Team at Peterborough?
08709 012 333 🙂
They were all posted on the 24th apparently, I phoned them yesterday :rolls:
Dave.
Re: Laughing all the way to the bank
I thought I’d dig this old thread up as I have come across an almighty rip off concerning Teka spares being supplied by Connect :eeek: :eeek:
As you may or may not know, Teka and Kuppersbusch are part of the same company, I needed to phone them today for a price on a Kuppersbusch cooker part, while I was on, out of curiosity I asked about some Teka fridge hinges that I asked Connect to price earlier today that seemed a tad OTT at £35 odd to me each
It turns out that Teka, should a member of the public phone them for exactly the same part they would be charged a mere £8.58 each inc VAT
If you need Teka parts, go direct, their number is 01253 8619163 😉
Rant over……..
……. for now 🙂Dave.
Re: Neb Vicenza
The oven element is this one in our on-line shop:
http://shop.ukwhitegoods.co.uk/product_ … cts_id=694
🙂
Dave.
Re: QED ?
Delete and move on anyway, if he keeps it up I’ll just delete him 😆
From the Planet if necessary 😉
Dave.
Re: Diplomat adp8234 facia panel clamps
Normally no, you would need 2 of each of:
995850254 and 765850205 assuming the metal springs are OK 🙂
Dave.
Re: Help with PCB part
It’s here in the online shop:
http://shop.ukwhitegoods.co.uk/product_ … cts_id=687
🙂
Dave.
Re: Hygena APL 8224/1
You may have a water distribution problem that caused the original element to fail by the sound of it.
The water doesn’t always cover the element in many dishwashers, it relies on it dropping or spraying around via the spray arms which may be blocked, check both spray arms especially the lower one as they are prone to splits along the seams.
Dave.
