Dave_Conway

Forum Replies Created

Viewing 15 posts - 2,686 through 2,700 (of 12,426 total)
  • Author
    Posts
  • in reply to: new home grill element #173301
    Dave_Conway
    Participant

    Re: new home grill element

    There’s two grill elements (presumably as it’s a range) but no picture, the descriptions are:

    Grill element – 081583301
    Grill element dual – 081561400

    You should be able to get these from the usual sources 🙂

    Dave.

    in reply to: zan fla1201 #173436
    Dave_Conway
    Participant

    Re: zan fla1201

    What else has been checked ?

    Pressure switch, NTC etc ?

    Dave.

    in reply to: program 2000 d/w #173401
    Dave_Conway
    Participant

    Re: program 2000 d/w

    It should be flashing an error code normally, check the NTC though as it’s such a common failure 😉

    Dave.

    in reply to: teba oven spares #173315
    Dave_Conway
    Participant

    Re: teba oven spares

    As Bryan says you’ll need the full model number to check to be honest, they may not even be available as Teba are now deceased in the UK 😉

    Dave.

    in reply to: BEKO WM1210 WK1 pump #173409
    Dave_Conway
    Participant

    Re: BEKO WM1210 WK1 pump

    Complete pump/filter is part number 2801100400 for the three hole version 🙂

    Dave.

    in reply to: Bernstein Cookers #173297
    Dave_Conway
    Participant

    Re: Bernstein Cookers

    Check the model number GB, it’s more likely a 600407 (600402 doesn’t exist) 😉

    Probably a Nardi

    Dave.

    in reply to: Bernstien group fridge B/I door hinges #173279
    Dave_Conway
    Participant

    Re: Bernstien group fridge B/I door hinges

    TELL wrote:02900392 can’t be sure!.

    That’s the model, it’s 02-900392 made by Siltal 🙁

    Don’t hold you breath for parts for these in a reasonable time. Masterpart will be able to order though, send them an email with the model etc 🙂

    Dave.

    in reply to: Hoover model HP6110M typeFCE2 #173351
    Dave_Conway
    Participant

    Re: Hoover model HP6110M typeFCE2

    Contact details are all on http://www.masterpart.com 🙂

    Dave.

    in reply to: Hinari Table top dishwasher #173333
    Dave_Conway
    Participant

    Re: Hinari Table top dishwasher

    You could try SEME but as Penguin says, don’t hold your breath 😉

    Dave.

    in reply to: Tricity Bendix – ATB3310 Oven Door Glass #173264
    Dave_Conway
    Participant

    Re: Tricity Bendix – ATB3310 Oven Door Glass

    I can supply by post but the Zanussi spares tech site is “limited” tonight for pricing etc, can you send an email to spares@ukwhitegoods.co.uk please with all the above information and I’ll reply tommorow when I have the info 😀

    Dave.

    in reply to: Zanussi DCE5655 Dishwasher – Microfilter #173421
    Dave_Conway
    Participant

    Re: Zanussi DCE5655 Dishwasher – Microfilter

    I can supply by post but the Zanussi spares tech site is “limited” tonight for pricing etc, can you send an email to spares@ukwhitegoods.co.uk please with all the above information and I’ll reply tommorow when I have the info 😀

    Dave.

    in reply to: How do I Fit Oven Thermostat to Tricity/Bendix? #173424
    Dave_Conway
    Participant

    Re: How do I Fit Oven Thermostat to Tricity/Bendix?

    It’s nore likely the element failing caused the thermostat contacts to “weld” due to the high current to be honest 🙂

    Thermostat is part number 3112758002 at around £30 inc VAT and carriage etc, an email to spares@ukwhitegoods.co.uk please if you’d like one

    Replacement invloves a fairly heavy strip down on these, if you’d prefer an engineer to call, check the repairs@ link below.

    I don’t need to mention power off when repairing I’m sure but for future readers 😉

    Dave.

    in reply to: Whirlpool ARC5571 Problem #173418
    Dave_Conway
    Participant

    Re: Whirlpool ARC5571 Problem

    Firstly, it’s not frost free 😉

    It would appear the thermostat has failed if the fridge is getting that cold, a pretty straightforward repair normally, thermostat is around £45 inc carriage if you need one, drop me an email to spares@ukwhitegoods.co.uk or if you’d prefer an engineer to check, the repairs@ link below should provide one 🙂

    Power off if you look yourself :zap:

    Dave.

    in reply to: Whirlpool ADG 710 dishwasher #173382
    Dave_Conway
    Participant

    Re: Whirlpool ADG 710 dishwasher

    The manual reset thermostat has tripped I expect, normally caused by blocked spray arms or poor water circulation, look for a red button 😉

    Power off when checking :zap:

    Dave.

    in reply to: SMEG DWI710E will not start! #173273
    Dave_Conway
    Participant

    Re: SMEG DWI710E will not start!

    You could try resetting the PCB, if you search:

    http://www.ukwhitegoods.co.uk/modules.p … ile=search

    For Smeg and/or Diplomat and “reset” you could try that, if not it’s time for an engineer to be honest. Check the repairs@ link below 🙂

    Dave.

Viewing 15 posts - 2,686 through 2,700 (of 12,426 total)