Dave_Conway

Forum Replies Created

Viewing 15 posts - 286 through 300 (of 12,426 total)
  • Author
    Posts
  • in reply to: tecnik cooker tkc215 #209348
    Dave_Conway
    Participant

    Re: tecnik cooker tkc215

    It depends which version it is, you really need the VIB number from the rating plate, the BSH site recognises those.

    TKC215/2 is HB3TI20
    TKC215/3 is HB3TI21

    You should be able to bring that up now, they probably both use the same grill element anyway 😀

    Dave.

    in reply to: New World DFEO70 oven #166083
    Dave_Conway
    Participant

    Re: New World DFEO70 oven

    It’s 5031689352451 then 🙂

    Dave.

    in reply to: Hoover HD96M #209289
    Dave_Conway
    Participant

    Re: Hoover HD96M

    sadsyndrome wrote:Thanks for your prompt replies, I’m very impressed and have asked for a price as you suggest.

    No email received but the element is now in the shop@ here:

    http://www.ukwhitegoods.co.uk/modules.p … cts_id=833

    😀

    Dave.

    in reply to: New World DFEO70 oven #166081
    Dave_Conway
    Participant

    Re: New World DFEO70 oven

    According to Connect it’s their part number 5031680829532 but that may be the one you already have ?

    Dave.

    in reply to: Hotpoint WF430 Bearing Kit #209065
    Dave_Conway
    Participant

    Re: Hotpoint WF430 Bearing Kit

    For future reference, the 30mm bearing kit is part number 1604600 🙂

    Dave.

    in reply to: New World DFEO70 oven #166079
    Dave_Conway
    Participant

    Re: New World DFEO70 oven

    Quite how I managed to find those part numbers last year is a bit of a mystery as this model isn’t on the Glen Dimplex disk 😕

    A PNE via Connect may be the best route Tony ?

    Dave.

    in reply to: Smeg oven not heating up #209212
    Dave_Conway
    Participant

    Re: Smeg oven not heating up

    clairabelle wrote:Do you think that its the element that needs replacing?

    Almost certainly.

    clairabelle wrote: If so where can I buy one from and how much are they?

    Right here 😀

    http://www.ukwhitegoods.co.uk/modules.p … cts_id=830

    clairabelle wrote:Would it be replaced from inside the oven or from the outside (back) of the oven?

    Inside normally with the power off please :zap:

    Dave.

    in reply to: Blomberg EOD609SS/1 Part No required pls #208297
    Dave_Conway
    Participant

    Re: Blomberg EOD609SS/1 Part No required pls

    There’s two but they are both now supplied as the square type:

    One is described as a limiter but no spec, part number 79X6341

    The other is a safety cut out @ 205C, part number 79X6354

    The diagram is a bit crappy but it looks like 79X6341 was originally the round one 🙂

    Dave.

    in reply to: Diplomat Element #209174
    Dave_Conway
    Participant

    Re: Diplomat Element

    Masterpart would be the best price for Servis parts normally although they have no stock of this, I’m sure they can order them in.

    Dave.

    in reply to: Teba TFC 1360 ss #209078
    Dave_Conway
    Participant

    Re: Teba TFC 1360 ss

    We can still get them 🙂

    It will (or should) be one of those Chris pointed to in the shop@ prefixed TEB…

    Dave.

    in reply to: Diplomat Element #209172
    Dave_Conway
    Participant

    Re: Diplomat Element

    Direct from MFI would be the fastest, they are on 08457 959722 but the list price is £26.99 ex VAT 😯 🙁

    Dave.

    in reply to: tricity president T/O stat #209165
    Dave_Conway
    Participant

    Re: tricity president T/O stat

    Qualtex list it as their part number O/T71 which is the same as Connect’s THM45.

    Now type 42TH72… 🙂

    Dave.

    in reply to: zanussi fc1000 Compact #209160
    Dave_Conway
    Participant

    Re: zanussi fc1000 Compact

    The part number has changed to 1260488505 and is out of stock everywhere but it’s not obsolete.

    Distriparts are showing a delivery time around w/c 13/04 🙂

    Dave.

    in reply to: OCEAN F/F #177244
    Dave_Conway
    Participant

    Re: OCEAN F/F

    45X8924 as above 😉

    They have it in stock, I ordered one this morning from them 🙂

    Dave.

    in reply to: Masterpart – Out Of Stock #187774
    Dave_Conway
    Participant

    Re: Masterpart – Out Of Stock

    Further to that, the situation is dire, very dire…. 👿

    What kind of an answer is “sorry, no due date” with no further explanation ??

    How the hell am I meant to pass that on to a paying customer who has already parted with their money in good faith ?

    Get your act together please or lose business 😉

    Dave.

Viewing 15 posts - 286 through 300 (of 12,426 total)