Dave_Conway

Forum Replies Created

Viewing 15 posts - 2,986 through 3,000 (of 12,426 total)
  • Author
    Posts
  • in reply to: PX group #171376
    Dave_Conway
    Participant

    Re: PX group

    eastlmark wrote:You are kind of missing the point

    No I’m not 😉

    You’ve had access since day one as you are a moderator. I was scanning an excel file yesterday afternoon/night with a list of all those registered to sell/service ISE and added those that weren’t in the “PX group”. You weren’t in that group so I added you but then realised I didn’t need to as you are a moderator and already had access.

    Does that make sense now ? 😆

    Dave.

    Dave_Conway
    Participant

    Re: Beko concrete bolts sheared off. How extract from plasti

    Not long, a quick image google for “bike washing machine” did the trick 😀

    Dave.

    in reply to: Smeg dishwasher model DWF44SS.1 #171440
    Dave_Conway
    Participant

    Re: Smeg dishwasher model DWF44SS.1

    Pump only 690070533 – £35.09 list
    Motor/pump 695210298 supersedes to 695210297 – £111.44 list

    No need to convert, MFI use the same part number as the OEM on all their products 🙂

    Dave.

    Dave_Conway
    Participant

    Re: Beko concrete bolts sheared off. How extract from plasti

    Don’t wory Mike, have a look at this guy, only in America eh 😉

    😯

    in reply to: Electrolux esl624 not filling #169690
    Dave_Conway
    Participant

    Re: Electrolux esl624 not filling

    Penguin mentioned the likely cost of the part above, it’s around £50-£60 😀

    For an engineer, click on the repairs@ link below, labour varies quite a bit to be honest regionally but can be discussed directly with the engineer.

    Dave.

    in reply to: Creda Menu 350 cooker #171437
    Dave_Conway
    Participant

    Re: Creda Menu 350 cooker

    There’s over 20 “Menu” models listed, none with 350 after the name though 🙁

    Any number on the stat or the model may be inside the user manual if they still have it ?

    Dave.

    in reply to: Disposal of Trade Waste #170532
    Dave_Conway
    Participant

    Re: Disposal of Trade Waste

    These should help:

    http://www.wasteworks.org.uk/legislatio … etail4.asp

    http://www.fsb.org.uk/data/default.asp?ID=76&loc=policy

    The owner of the waste is the person who instigates the service visit so essentially the customer owns the old door but as the fault is down to the manufacturer they should take responsibilty 🙂

    Dave.

    in reply to: Fridgeaire RL6003B #171420
    Dave_Conway
    Participant

    Re: Fridgeaire RL6003B

    Good news then as it sounds like the thermostat may be at fault 😀

    If you’re planning on repairing yourself (power off :zap:), I can help with the thermostat, and email to spares@ukwhitegoods.co.uk or check the repairs@ link below for an engineer 🙂

    Dave.

    in reply to: Fridgeaire RL6003B #171418
    Dave_Conway
    Participant

    Re: Fridgeaire RL6003B

    But does it switch off occasionally as it’s meant to (thermostat controlled) or is the noise constant ? 😉

    Dave.

    in reply to: dacor american oven #171415
    Dave_Conway
    Participant

    Re: dacor american oven

    They don’t seem to have any contact details outside the US, Canada or Mexico so how it ended up in the UK ? 😕

    Try here:

    http://ww2.dacor.com/services/contact/index.asp

    Dave.

    in reply to: HELP!!! Tricity Bendix filter needed #171424
    Dave_Conway
    Participant

    Re: HELP!!! Tricity Bendix filter needed

    :wave:

    in reply to: HELP!!! Tricity Bendix filter needed #171423
    Dave_Conway
    Participant

    Re: HELP!!! Tricity Bendix filter needed

    I can get it for you 🙂

    Which part do you need, the main large filter or one of the two smaller pull out filters that fit inside the large one ?

    Dave.

    in reply to: Fridgeaire RL6003B #171416
    Dave_Conway
    Participant

    Re: Fridgeaire RL6003B

    Is the motor (compressor) running continuously ?

    Dave.

    in reply to: Wpl AWZ2203 #171409
    Dave_Conway
    Participant

    Re: Wpl AWZ2203

    Fish oil corrosion ? 😆

    Dave.

    in reply to: ERROR CODE #171208
    Dave_Conway
    Participant

    Re: ERROR CODE

    “The water load was halted by the anti-flood safety
    switch of the pressostat, due to faulty pressostat or
    faulty solenoid valve (mechanically blocked opened).”

    Kind of related then 😉

    Dave.

Viewing 15 posts - 2,986 through 3,000 (of 12,426 total)