Forum Replies Created
-
Posts
-
Re: Neff Fan Oven Replacement
It sounds like you need a new selector switch.
If you can post up the full Enr U1721GB/?? please I can check the part number/price etc for you.
Dave.
Re: Unknown D/W
It sounds as if it was half way through a cycle or it’s in test mode.
It should finish and be OK but if not holding the start button should reset it 😕
Odd one really.
Dave.
Re: STOVES 700GC/NG
They only show part number 082593000 against that model but it doesn’t specify which type they are.
I think your customer would be best to contact Stoves and see if they are available as an optional extra.
Dave.
Re: BF41 Dishwasher (GDA)
It’s more likely the lower spray arm has a split down the seam causing the leak Steve 😉
Lower spray arm – 31X9985
Door seal – 31X9540
Dave.
Re: Teka DW659F1
cornwell40 wrote:it’d be nice to be four armed (as Buddah would say)
😆
It’s probably a Bosch/Neff, Kupperbusch (spelling ?) own the Teka brand name but nearly all the dishwashers I’ve seen/get asked for spares for are BSH manufactured.
Dave.
Re: Whirlpool ADP 335 Pulsating!
This may be a little difficult to help with as all the tech info we have available in the UK is for UK sold products.
Can you take a photo of the dishwasher with the door open, upload it to imageshack or similar and link to it here, we may be able to help further then 😀
Dave.
Re: BLOMBERG WA295 1503AS WONT SPIN
It’s either detecting an “out of balance load” then or either the brushes may be worn or it’s not emtying fast enough.
Have you checked the filter ?
Dave.
PS, turn the CAPS LOCK off eh 😉
Re: Indesit WIE127
E11 or F11 ?
F11 is a “no drain” error. Check for blockages etc in the filter first off.
If you can confirm the error code though 🙂
Dave.
Re: PX group
It was called Project X Mark before the ISE brand name came about and the group are the UKW members who have shown an interest so they can gain acces to the ISE forums.
I’ve been updating “a little” 😉
I’ve actually removed you now from the “group” as you should be able to see those forums anyway as a moderator ?
Dave.
Re: Hotpoint Aquarius Dryer
It’s probably the belt which will be a straightforward repair generally and not overly expensive.
Model number please for correct identification and further help (93?? more than likely at that age ;))
Dave.
