Forum Replies Created
-
Posts
-
Re: low temperature
Part number 3581907403 at £15.43 inc VAT plus carriage so not too bad on price.
As far as fitting goes, I would ask an engineer to be honest, as mentioned it has a gas hob and may require gas tight connections to be disturbed to gain access so legally only a Corgi registered engineer can repair.
Check the repairs@ link below, if you get stuck for the spare, let me know I can easily obtain for you.
Dave.
Re: WHITE Westinghousoven model 05-203105
806890118 (Smeg) andprobably superseded by now 🙂
The pattern one will do, ELE4207 for instance.
Dave.
Re: Baumatic BT2760ss
Baumatic direct is the best way to get the part number 01189 336922, I’m not sure on price but Connect should hold stock but they only list the upper and lower elements
Dave.
Re: Naiko DW040 spray arm
I can get this for you, currently nil stock in the UK though I’m afraid. It is a complete spray arm.
About £15 plus the carriage. An email to spares@ukwhitegoods.co.uk please if required 🙂
Dave.
Re: low temperature
To identify the correct thermostat I’ll need the product code please, starting 947???? from the rating plate. There’s quite a few versions of this one.
Dave.
Re: error code 08 indesit
It relates to the heater control circuit, possibly the PCB or poor connections.
Power off if going in your self :zap: or check the repairs@ link below for an engineer.
Or if you’re in the trade (username ?), have a read of this 🙂
http://www.ukwhitegoods.co.uk/modules.p … age&pid=26
Dave.
Re: Bosch query.
CIH is Combined Independent Holdings, they are a buying group, Euronics are part of it:
http://www.euronics.co.uk/index.html
Dave.
Re: Whirlpool ADG954/2 Type 12137
gazmo wrote:Is there a faulty pump that should be forcing the water through the arms?
Yes, it sounds like the circulation motor has a problem but at around £150 it is worth getting it double checked by an engineer if you’re unsure. Try the repairs@ link below 🙂
If you do need a spare, come back and let us know. Power off if you do check yourself please :zap:
Dave.
Re: Hotpoint DW BFI620 Hinge
Yeah, I noticed that as well, it must be wong on Connect. Partfinder says L/H as does Masterpart 🙂
Dave.
Re: wpl awm6140 error
That’s F6, a no drum rotation error, tacho, motor, PCB or brushes.
Possibly a broken lead in the motor harness ?
Dave.
