Dave_Conway

Forum Replies Created

Viewing 15 posts - 3,706 through 3,720 (of 12,426 total)
  • Author
    Posts
  • in reply to: DWF50P sensor? #163249
    Dave_Conway
    Participant

    Re: DWF50P sensor?

    I think it must come as part of the heater, it certainly isn’t shown on the Partfinder diagram 🙁

    Dave.

    in reply to: Diplomat 8512 washing machine #163150
    Dave_Conway
    Participant

    Re: Diplomat 8512 washing machine

    It’s the same as a Servis (Merloni) so you can get that timer anywhere using the part number Mark provided 🙂

    Dave.

    in reply to: prima 854560015810 #163230
    Dave_Conway
    Participant

    Re: prima 854560015810

    Six flashes whould indicate a flow meter related problem if that is the sensor you refer to ?

    It comes as part of the air break chamber at around £50 plus carriage so it’s worth ruling anything else out before ordering one 😉

    An email to spares@ukwhitegoods.co.uk please of required, please remember to power off before checking/repair 🙂

    Dave.

    in reply to: electrolux integrated slimline esl424 #163233
    Dave_Conway
    Participant

    Re: electrolux integrated slimline esl424

    Moved to the trade area Tom 😉

    She hasn’t got a D/W freshener hanging on the front of the upper basket by any chance has she ? 🙂

    Dave.

    in reply to: Bosch AutoDefost Fridge Freezer frosting in freezer #163229
    Dave_Conway
    Participant

    Re: Bosch AutoDefost Fridge Freezer frosting in freezer

    As it’s electronically controlled it could be a number of things to be honest, heaters, thermostats, PCB etc.

    Engineer time to be honest, check the repairs@ link below 🙂

    Dave.

    in reply to: Zanussi ZDQ595 #162988
    Dave_Conway
    Participant

    Re: Zanussi ZDQ595

    pooh wrote:I’ll have a look…obviously need to take the oven out of the enclosure etc,

    It will be on the repair docket left by the engineer 😉

    There’s no need to check though if the slow motor was fitted, I was just digging at possibles 🙂

    http://www.serviceforce.co.uk/contact.asp – have you tried there ?

    Dave.

    in reply to: Zanussi ZDQ595 #162986
    Dave_Conway
    Participant

    Re: Zanussi ZDQ595

    Electrolux Service wrote:All UK manufactured cooking products with electric fan ovens are now being fitted
    with the reduced speed fan motor. This slower speed motor reduces noise levels and
    aids energy efficiency.
    Oven Fan Motor Kit 3115211-01/7 (contains 1x fan motor & 3 screws).

    Can you confirm the part number of the motor fitted ?

    Dave.

    in reply to: Servis m7006 freezer runs continuously #163202
    Dave_Conway
    Participant

    Re: Servis m7006 freezer runs continuously

    Possibly either the PCB or sensor if it’s getting down to the correct oprating temperature.

    It may be worth putting a thermometer in there though to ensure it is, -18C is the “normal” deep freeze temp.

    The orange light is fast freeze making the compressor run 24/7 if that’s on it will be the problem 😉

    Dave.

    in reply to: Taurus in DAD flyer #163058
    Dave_Conway
    Participant

    Re: Taurus in DAD flyer

    Aha, the Domar factory, nice one :tup:

    It makes sense then with the GBdar tie in 😉

    Dave.

    in reply to: Hygena APL3320 fan element #163132
    Dave_Conway
    Participant

    Re: Hygena APL3320 fan element

    Universal Hygena fan element fits that one RR1401 from Masterpart, ELE3510 from Connect.

    There isn’t an easy range of spares to carry for MFI products as they are so diverse but you’ll quite often find that you’ll already have the part as nearly all of it is made by others for them 🙂

    RAST Connectors, CPC or RS would be the best place I would think.

    Dave.

    in reply to: fa aquastop #163134
    Dave_Conway
    Participant

    Re: fa aquastop

    From the known error codes list Wilf 😉

    FA. OWI failure. Dirty OWI lens. OWI defect or control board defect. Check cabling.

    The OWI is the turbidity sensor (how much matter is being circulated)

    Dave.

    in reply to: Taurus in DAD flyer #163056
    Dave_Conway
    Participant

    Re: Taurus in DAD flyer

    http://www.dad-online.co.uk/html/news29.html

    http://www.taurus.es/ – broken 🙁

    Taurus, based in Barcelona, was established in 1962, and was bought by its current owners in 1997.

    I can’t find out who though but Antonio Merloni don’t seem to own it, I wouldn’t be surprised if it’s Balay although they would use the BSH network I would think 😕

    Dave.

    in reply to: Belling Cookcenter #163123
    Dave_Conway
    Participant

    Re: Belling Cookcenter

    I just checked a few of the Cookcenters and they all appear to be Creda and have the same fan motor.

    Creda part number 6101033 or the Stoves part number is 082603745

    Dave.

    in reply to: caremark spares #162961
    Dave_Conway
    Participant

    Re: caremark spares

    PINKY wrote:model. 02-601210

    I’ll assume it’s 02-601201 as 601210 doesn’t exist, timer part number 76X4247 (about £40 trade)

    PINKY wrote:model 05-908107 need a control knob

    R6200289 Gas knob, black
    R6200266 Knob, electric ring, black

    No prices but an email to masterpart should sort that 😉

    Dave.

    in reply to: Hotpoint DWF40P #163122
    Dave_Conway
    Participant

    Re: Hotpoint DWF40P

    C00097874 from Partfinder 🙂

    Dave.

Viewing 15 posts - 3,706 through 3,720 (of 12,426 total)