Forum Replies Created
-
Posts
-
Re: aeg oko lavamat 72630 update problem!!!!!
E20 is a drain problem, as long as you’re certain nothing is restricting the pump impellor then the pump itself may have failed.
Inside the door is the product code (PNC) which will be required for identification 🙂
Dave.
Re: ariston (margherita) A1535 advantage spin problem
It sounds as if the pump/filter is blocked, the buzzing sound is probably the pump trying to rotate.
Remove the filter (with a towel/bowl handy ;)) and check in there for coins etc that may restrict the pump impellor.
Dave.
Re: Zanussi DE6854
The root cause of the problem will need to be identified, I’m sure Electrolux (Zanussi) will be willing to help.
http://www.serviceforce.co.uk should put you in touch with a local authorised centre.
Appliances catching fire is a very rare occurance to be honest so any feedback would be great please 🙂
Dave.
Re: Helppp… Firenzi DW930 & Power Cut
It’s probably F1 then (NTC failure) as that would cause the no heat problems.
Easy enough repair and not overly costly 😀
Dave.
Re: Whirlpool AWM9000 washing machine
There is no F2 according to the tech info on SIOS 😕
I’ve emailed the diagnostics and error codes list which should help 😀
Dave.
Re: AEG L74630 AUTO CAUSING PROBLEMS.
The part number should have been 407 13 18-93/7 and is a non-configured PCB so yes it will need to be done 😉
If you need the config/diagnostics, let me know and I’ll send them (large file – broadband required)
Dave.
Re: Should I Buy A Diplomat Oven
I would say they are mid-range so not too bad but not the greatest either.
Neff (Bosch) are generally pretty good to be honest, you may have been a little unlucky with yours.
Stoves are also OK, CDA also do a good range of built in:
Dave.
Re: Smeg SUK91MFX
Don’t forget this is the “two fan/two element” oven 😉
Smeg wrote:fan element now replaced with 1500 watt element, part number 806890442.
It is necessary for both elements to be replaced at the same time to avoid uneven cooking.Dave.
Re: Diplomat (Whirlpool) ADP8322
The part secured by the screws which the tube clips in to is 481241818341 at £10.73 plus carriage, that’s the bit that normally causes this problem 🙂
Dave.
Re: Should I Buy A Diplomat Oven
This one is made by MFI themselves, they do make some (or have them comissioned) but it’s not a Stoves or a Smeg.
Dave.
Re: Sluggish Fan on Neff Oven
boro wrote:Yup needs a new fan motor part no. 096825
Which is here if required:
http://www.ukwhitegoods.co.uk/modules.p … cts_id=447
Power off if attempting yourself please or as boro says if you’re not sure, check for an engineer, the repairs@ link below should provide one 🙂
Dave.
Re: Public Advice
johnmac11 wrote:Do the mods think that Bryan is putting himself in a sticky position if the customer strips down the gas taps and it goes BANG after repair is done.
Deleted and Bryan PM’d 😉
Dave.
Re: Diplomat 8242 Dishwasher fault code req
It is on the one landing in your inbox shortly 😆
Dave.
