Forum Replies Created
-
Posts
-
Re: A Question of Degree.
I find it quite staightforard to be honest…..
Judge each post on it’s own merit and respond accordingly always bearing in mind any future readers 🙂
If you want a regimented type of thing with set rules, guidelines and restrictions then go join the Army 😆
Dave.
Re: Candy df145
DF145 isn’t recognised, unless it’s a DFI45 ? 😉
If it is, can you post the lamp numbers rather than the descriptions from left to right which are flashing (it looks like there a five in total)
Dave.
Re: Hinari MX904CEGSS fuse blown
Hi Tony,
A quick question please, are you in the trade ?
As far as I am aware only the most unscrupulous spares supplier would sell a magnetron and the safety fuse to anyone without the correct test and safety equipment to be able to fit these parts.
Dave.
Re: Belling Formula THree oven door
If you could check the model number please, it’s probably an XOU188 or XOU388, if it is the door hinges are obsolete for both now I’m afraid 🙁
Dave.
Re: Caple Oven element
Nowt I can find Kirk I’m afraid 🙁
All Caple model numbers begin with C….. normally 😕
Have you tried JTM (AIS) ?
Dave.
Re: bocuse 2040 oven problems
Possibly the selector switches have burnt out, each oven has it’s own.
It may also be a thermostat problem, the left oven one is now obsolete.
This requires a visual and/or electrical inspection, the repairs@ link below should provide someone for you to do this 🙂
If you do decide to have a look yourself, please disconnect the cooker from the power supply completely :zap:
Dave.
Re: A Question of Degree.
Penguin45 wrote:Personally, I am comfortable with the advice we offer.
Me too, it’s all down to disceretion ateotd, we’ve had no issues thus far 🙂
Don’t fix what ain’t broke 😉
Dave.
Re: Hygena Ahy3220 Electric Single Oven
http://www.ukwhitegoods.co.uk/modules.p … pic&t=9279
😉
Dave.
Re: Cookers Oven 02-6000101A
The part number was 76X6042 but it’s obsolete now 🙁
A generic one will fit though, PS1492 from Masterpart is an alternative 🙂
Dave.
