Forum Replies Created
-
Posts
-
Re: de detrich fm4447
I can check but there’s quite a few versions, FM4447 then a bit more on the end from the rating plate please 🙂
Dave.
Re: storing used bosch dishwasher.
Keeping it damp free is the best bet really 🙂
Oh, and put a humane rodent trap nearby, mice seem to love Bosch dishwasher hoses above all others to nest with for some reason (honest) 😆
Dave.
Re: Ariston as100 help
denviks wrote: how do i drain the undertray
Lean the dishwasher to one side and get some towels ready 😀
If it happens again there’s an underlying cause (leak as mentioned) that will need checking out.
Dave.
Re: Hoover WA110 Performa 1100
majorpdd wrote:Would the fan make the thurmostate trip
Yes, if it’s not running correctly or fast enough it will cause the heater ducting to overheat 🙂
Dave.
Re: Masterpart – Out Of Stock
No, they won’t send them carriage free when they arrive (well they don’t to me anyway), they will add them to subsequent orders 🙂
Dave.
Re: Belling M394TC
Re: Hotpoint WF250
Are you in the trade by any chance?
http://www.ukwhitegoods.co.uk/modules.p … age&pid=26 😉
Dave.
Re: Help required – Fagor Elegance Washing Machine
Fagor should be able to supply a manual:
Fagor Electrodomésticos S.Coop
UK REPRESENTATIVE OFFICELEROY HOUSE
UNIT 3P, 436 ESSEX ROAD
LONDON N1 3QPPHONE
INFOLINE : 0870 600 1417
AFTER SALES SERVICE: 0870 609 3252Fax: 0207 354 0789
E-mail:
infoline: info.uk@fagor.com
after sales service : service.uk@fagor.comDave.
Re: ELBA PX906 Ser no 0006
Yep, it’s a kit with basically the whole loom already attached to the switch 🙂
Dave.
Re: ELBA PX906 Ser no 0006
Part number 0500281 which is the switch only, the recommended repair though is a modified switch with the wiring harness which is 1131114S
Connect have both in stock.
Dave.
Re: New Bearing on Zanussi WDJ1294
cwilso wrote:I don’t Believe that there is no way of finding the code without dismantling.
No-one here is suggesting that 😉
cwilso wrote:Now that surely should point to every part on the marchine including bearing.
Yep, it does. The bearing kit you need is this one:
http://www.ukwhitegoods.co.uk/modules.p … cts_id=145
cwilso wrote:No offense but i don’t need to be patronised if I didn’t know this then I sure wouldn’t be attempting this myself and I can quite understand it not a “DIY Fix” however it sure beats a new machine at £300+
I don’t think someone concerning themself with your safety is patronising you in any way, we have to put that on every post we reply to, it’s not just for your benefit, many 100’s of readers will come across this post in the future who may not be aware of the safety issues.
Dave.
