Forum Replies Created
-
AuthorPosts
-
Dave_Conway
ParticipantRe: ariston awd 12s margherita
Yeah, refurbished PCB’s are fine on the whole.
I have to say though (and I am not trying to discredit your engineer in any way) alarm bells always ring when machines have to be uplifted to workshops for repairs that can easily be carried out in the home, especially as he’s only charging you £20, it will cost more than that in time/fuel 😉
Dave.
Dave_Conway
ParticipantRe: ariston awd 12s margherita
That’s the correct price for the more expensive of the two boards for this model, there are two depending on serial number, the other one is about £20 cheaper so it’s correct yes.
The labour though is very cheap, was this on top of a call out charge or the total labour for everything ?
Dave.
Dave_Conway
ParticipantRe: Dyson fault codes
Have a look here:
http://www.howtomendit.com/answers.php?id=242
I personally don’t like the site as there’s lots of amatuers there giving inaccurate information but someone has an answer to resetting these, although it doesn’t really answer the specific fault code question 😕
It may help.
Dave.
Dave_Conway
ParticipantRe: New Smilie
Martin wrote:P.S. The shocked one doesn’t work Ken ‘cos is shares the same name as the other one (needs changing please!)
Done :zap:
Dave.
Dave_Conway
ParticipantRe: flavel website ?
There isn’t one Ant.
The Flavel name is now owned by Beko so all enquiries for anything made since 2002 should go through them 😉
http://www.beko.co.uk but there’s no Flavel products on there, it it’s parts your after, then it’s SEME http://www.seme.co.uk
Dave.
Dave_Conway
ParticipantRe: cookers 605504 oven door
Sorry for the delay I only got the info this morning 🙄
The door outer is part number 42712153 would be £59.76 inc VAT and delivery.
You may wish to reconsider your purchase 😉
Or have a look at it, it may glue back but it’s unlikely to stay in place for long to be honest.
Dave.
Dave_Conway
ParticipantRe: hoover fridge
This doesn’t sound correct to me at all marge, call them back to sort it 😉
Dave.
Dave_Conway
ParticipantRe: Crusader 37667 condensor dryer doorseal ripped
The only part described on Partfinder is 1701151 which doesn’t appear to be where you’d expect to find it on the diagram :con:
It looks like it fits on the inner panel in front of the drum.
Dave.
Dave_Conway
ParticipantRe: Baumatic BT904 built in double oven
So, essentially it’s a 190 C normally closed 16amp thermostat.
I’ll see what I can come up with 😉
Oh, and the price Smeg quoted you is correct for that part number 😯 ludicrous !
Dave.
Dave_Conway
ParticipantRe: aeg freezer
Email on theway Jon 😉
Dave.
February 1, 2005 at 6:52 pm in reply to: Scandinova fridge freezer went bang – need new circuit board #123160Dave_Conway
ParticipantRe: Scandinova fridge freezer went bang – need new circuit b
It should be available Steven, not a model that’s listed though so it’s back to Comet as well I’m afraid.
Dave.
Dave_Conway
ParticipantRe: Dave “Teddy Bear” Conway
Hmm, I’d forgotten about that until now, I wonder who did the names then 😉
I wonder if Cafe Press would be interested in selling the “ken iron” :rotl:
Dave_Conway
ParticipantRe: Greyhound racing…
Let him have your vacant turbo turtle enclosure Martin 😆
Dave_Conway
ParticipantRe: Ariston Magherita A1535
8 flashes refers to a heater control problem which is not a DIY repair I’m afraid.
Have a look at repairs@ or the directories to see if there’s an engineer locally that can provide a service visit for you.
Dave.
Dave_Conway
ParticipantRe: Baumatic BT904 built in double oven
The Baumatic and the Smeg one are highly unlikely to be the same part.
Campini are merely the manufacturer of the thermostat, it just so happens they are fitted to various cookers.
The important thing here is the temperature as they are safety stats and critical.
It would appear from Alan’s post that the Baumatic one is 180 C but I’m not sure on the Smeg one.
Patrick, can you post the Smeg model number please.
Dave.
-
AuthorPosts
