Forum Replies Created
-
AuthorPosts
-
Dave_Conway
ParticipantRe: aeg electronic f/f alarm
You have mail 😉
Dave.
Dave_Conway
ParticipantRe: Homark fan assisted ovan
Almost certainly the fan element Nix.
If you can post the model number which should be around the door somewhere, I can check which one etc for you.
Dave.
Dave_Conway
ParticipantRe: Fly-on-the-wall?
When I say friend I meant he was an engineer not a manufacturer or WP, I can’t/won’t disclose exactly who people are unless they request it or they do it themselves.
I don’t know him personally.
If he now works for BG then he may well turn out to be a friend 😉
Dave.
Dave_Conway
ParticipantRe: Servis M7665FF6
Nothing on the info I have here Jason, not even the part number for a service manual if such a thing exists 😡
Also moved to trade tech enquiries, in case someone happens to know the codes, we can’t have them on display in the public forums 😉
Dave.
Dave_Conway
ParticipantRe: candy condenser dryer leak
Repairable I would think.
Normally it’s just a valve or seal leaking or something along those lines which shouldn’t be too costly.
Take a look at repairs@ and the diectory on the navigation menu to the left and check for a repairer in your area 😀
Dave.
Dave_Conway
ParticipantRe: Ariston AS150 dishwasher
Which begs the question, how many people would renew/purchase one if the cost wasn’t so prohibitive 😕
Dave.
January 21, 2005 at 9:43 am in reply to: Replacement glass for philips series 90 built in Oven #123036Dave_Conway
ParticipantRe: Replacement glass for philips series 90 built in Oven
It sounds like that’s just the handle fixing holes if they are at the top.
You could blank them off yes, but it won’t make a lot of difference if you leave them as they are to be honest.
Dave.
Dave_Conway
ParticipantRe: aeg electronic f/f alarm
I will have later today when I get my new TDS disk installed, which takes hours 🙁
I uninstalled the old one yesterday and ran out of time 🙄
I’ll get back later with any info I can find.
Dave.
Dave_Conway
ParticipantRe: Instruction Manual for Flavel Milano
Ignore the previous 😉
It is correct, I was reading the main post rather than the topic and refering to Beko models rather than the Flavel one.
I’ve placed an enquiry for you, hopefully I’ll get a reply pretty soon.
Dave.
Dave_Conway
ParticipantRe: Ariston AS150 dishwasher
Yep, that’s the one.
Described as “Selector Switch – 8 Function”.
Dave.
Dave_Conway
ParticipantRe: aeg electronic f/f alarm
If there is an error with any of the sensors there should be a small rectangle in one of the two displays, this indicates which is at fault.
Is it not displaying this ?
Dave.
Dave_Conway
ParticipantRe: Instruction Manual for Flavel Milano
I should be able to obtain the manual for you, the model number though is incorrect, if you can check this and post back I’ll see what I can do 😉
Dave.
Dave_Conway
ParticipantRe: Hoover “UH” Dishwasher
Many thanks go to one of our members who once again proved that we can all help each other out.
Yes Mark, Chris does now have the info 😀
Dave.
Dave_Conway
ParticipantRe: Known Error Codes
Newer Hotpoint, Creda, Ariston and Indesit Dishwashers:
AL01 – Anti flood switch operated
AL02 – Valve or connections
AL03 – Time out – drain
AL04 – Thermistor (module)
AL05 – Circulation pump
AL06 – Time out – fill
AL07 – Not used
AL08 – Time out – heat
AL09 – Software recogntion error
AL10 – Heating circuit
AL99 – Communications error – connectors, cables etc.
H20 – Time out – fill (taps)Probably covers quite a few Merloni cloned models.
Dave.
Dave_Conway
ParticipantRe: Paul Bocuse Range Cooker oven shelves
Email on the way Kate 😀
Dave.
-
AuthorPosts
